I'm Baaaaack
 

ok so that was a lot of work. drove it to work today and everything feels really really good, just have to learn how to adjust the up/down shifts and lockup points w/ bs3.

here are a few photos to highlight what i've been through since november.

the wreck
98 formula m6 99k miles
http://www.richmondperformancemuscle.../original.aspx
the replacement
98 ws6 M6 84k miles
http://www.richmondperformancemuscle.../original.aspx
the rims
17" iforged senekas 8" front, 10 in back
http://www.richmondperformancemuscle.../original.aspx
presents from bmr
k member, lower control arms, tq arm cross bar, subframe connectors
http://www.richmondperformancemuscle.../original.aspx
the paint
gm carbon metallic w/ black pearl in the clear
http://www.richmondperformancemuscle.../original.aspx
the roll bar
wolfe 5pt. chromoly bolt-in from the formula
http://www.richmondperformancemuscle.../original.aspx
the engine
w2w ls2 out of the formula
http://www.richmondperformancemuscle.../original.aspx
the rear
moser 3.42 12b out of the formula
http://www.richmondperformancemuscle.../original.aspx
the boost controller
http://www.richmondperformancemuscle.../original.aspx
the brains
bs3 dai w/ trans control
http://www.richmondperformancemuscle.../original.aspx
transmission
Transformance 4L80e w/ rossler t-brake
http://www.richmondperformancemuscle.../original.aspx
the shifter
B&M Quicksilver
http://www.richmondperformancemuscle.../original.aspx
trans cooler
B&M 130-70274
http://www.richmondperformancemuscle.../original.aspx
the stall
yank 4l80 sc3000
http://www.richmondperformancemuscle.../original.aspx
the turbo set up
tti race kit w/ home 88mm conversion
http://www.richmondperformancemuscle.../original.aspx
the cat-back
3.5" stainless works
http://www.richmondperformancemuscle.../original.aspx
under the hood complete
http://www.richmondperformancemuscle.../original.aspx
finished product; click for full size
http://www.richmondperformancemuscle...9/500x375.aspx

Thanks to BigStuff3 for the 4l80 conversion upgrade
Thanks to BMR for the K member, LCA's, TQ arm mount, and the subframes
Thanks to Turbo Technology for rebuilding and replacing most of the turbo kit
Thanks to Stainless Works for the cat-back
Thanks to all the guys in RPM for the company and assistance with the project.

Thanks to everyone from here that gave for the cause. I am truly blessed to have such support.

Hope you guys like the car! I do!

wonder how fast it will go? I got a set of 325/50/15 MT Dr's looking for some wheels.

Thanks again.

wheres the drool smiley

Glad to see you got it up and running and back on the road.Should be a liitle quicker with the auto.Congrat's.Look's great! :drive:

congrats man, its good to see you finally got the car back and running, auto ftw :drive:

Congrats! I bet it was great to fix anything that was bothering you with the other car and have it finished pretty quickly too. Looks great I am happy for you after all the stuff you went though you deserve it brother. By the way I still don't have my factory tach working it is really messing with me as that is the only thing left to do except tune on it etc... Drove mine for the first time on friday it feels like it is going to be a winner lol!

Damn. :eek2: That is a nice setup.

Good to see you back! :judge:

great pictures, she looks good :)

Welcome back! Looking good and enjoy!

Welcome Back!

u built this new car before i finished my old one!

Awesome! Def one sick ride, back better than ever! And in more style :)

awesome David look forward to good results from the car!

Hey Dave, glad to hear it's driving.... what was the issue you were chasing?

I've been out of town and will be for a lil while longer :( I want a ride when I get back :chug:

Good luck, tell everyone I said what's up.

Looks good. Must be nice to have it all together again!

glad to see its going well,hope that chip-ins u got helped some too

Very nice. Your going to love the BS3 controlled 80E with the Rossler brake. Just let go of the button and steer. :) You planning on locking it up at the track?
Did you get the pan from Rossler? I haven't gotten my 80 back from Rossler yet with the new tricks done to it. :devil: He said he was having pans made. My biggest complaint to him was having to use the deep cast pan. Ate up lots of ground clearance.

Man, you work fast. You dont mess around, dude. :eek2: Looks real nice. I love the paint.

Nice work

Eric

Congrats man. Good to see you back into the game. Can't wait to see some new track times out of that thing :drive:

Damn. Fuggin car is beautiful. Can't wait to see results!

I hope the 12 pack I gave you some cash for was put to good use :chug: