Hi-Flo "Street Killer" Install pics
#1
Hi-Flo "Street Killer" Install pics
Here are some pics of my install. Car is at the shop getting finished. Progress is being made pretty slowly since every step comes another little problem. You can see we got the intercooler to stand upright unlike the way hi-flo was installing theirs. We need to fab a custom downpipe since the Hi-Flo one was not working. We are now working on routing the plug wires and installing gages. We still need to make swaybar spacers to clear the crossover. We are also going to make custom A/c lines and hook up the A/C. Car should be finished in two weeks or so. Work has been going on for two months so far. I will keep adding pics as they come.
Last edited by 52172; 04-18-2007 at 09:36 AM.
#3
10 Second Club
iTrader: (7)
Join Date: Mar 2005
Location: Buffalo
Posts: 1,159
Likes: 0
Received 0 Likes
on
0 Posts
looks good. make sure you look over the headers VERY closely. the welds were even shittier than i first thought. i had to weld shut NUMEROUS holes, and seams that werent welded in the first place. Not to mention milling the flanges at my buddy's work. also had to port the inside of the headers because someone doesnt know how to make headers, or weld thin SS properly.
what did it take to mount the IC vertical? im finally in the stages of putting my car back together, i had the chassis stripped down to nothing
what did it take to mount the IC vertical? im finally in the stages of putting my car back together, i had the chassis stripped down to nothing
Last edited by Turbo LS1 SS; 04-18-2007 at 10:08 AM.
Trending Topics
#11
Originally Posted by RealQuick
nice catch on the oil drain smokin! Also, that wastegate was way off! Jeeze, it should never have left the shop like that!
#12
TECH Junkie
iTrader: (14)
Originally Posted by 52172
Car never left the shop like that, but Hi-Flo did send the parts that were made like that. Hopefully a little finesse will make it fit.
#20
TECH Apprentice
iTrader: (2)
Join Date: Oct 2004
Location: Pensacola
Posts: 307
Likes: 0
Received 0 Likes
on
0 Posts
Hey is your fuel pick-up in the bottom of your stock tank? Without a sump you better watch the fuel level carefully and not let it get low cause when you get on it and the fuel goes to the back of the tank and uncovers the fitting your F@#$ed!!!!!!!