HPM TTiX 347 Dyno Results
08-17-2007, 11:47 PM
#1
Staging Lane
Thread Starter
iTrader: (5)
Join Date: Apr 2004
Location: Knoxville, TN
Posts: 64
Likes: 0
Received 0 Likes
on
0 Posts
HPM TTiX 347 Dyno Results Customer came over today and we took his car to the dyno for a few pulls. Dynojet dyno, no brake on it.
This first graph has two pulls, the first one is pretty much right off of the street on 10-11 psi, the second one is after a little cool down and on 13.5 psi.
This next graph is on 16.5 psi, he wanted a "glory pull"
Overall very happy with the results as was James. The shop was 99.7 next to the dyno it was smoking hot.... I posted up the AFR's too, I did not want to play with it too much since it was so hot. Anything over 11 psi we had wheel spin issues, so I had to make a pull to get the tires hot then make another one immediately after to get it to hook up.
HPM Built 347, TTiX kit.
Dart 225 Heads.
Dr. Phil cam.
Nothing fancy about this setup...
This first graph has two pulls, the first one is pretty much right off of the street on 10-11 psi, the second one is after a little cool down and on 13.5 psi.
This next graph is on 16.5 psi, he wanted a "glory pull"
Overall very happy with the results as was James. The shop was 99.7 next to the dyno it was smoking hot.... I posted up the AFR's too, I did not want to play with it too much since it was so hot. Anything over 11 psi we had wheel spin issues, so I had to make a pull to get the tires hot then make another one immediately after to get it to hook up.
HPM Built 347, TTiX kit.
Dart 225 Heads.
Dr. Phil cam.
Nothing fancy about this setup...
