LS1TECH - Camaro and Firebird Forum Discussion

LS1TECH - Camaro and Firebird Forum Discussion (https://ls1tech.com/forums/)
-   Forced Induction (https://ls1tech.com/forums/forced-induction-9/)
-   -   Testing out the APS twins and BOV's (https://ls1tech.com/forums/forced-induction/857025-testing-out-aps-twins-bovs.html)

JMBLOWNWS6 Feb 2, 2008 07:30 PM

Testing out the APS twins and BOV's
 
This is about 9.5 psi and I am not going past 5800 rpm's. Logs say it's only 75% throttle via the TPS. And the AFR is about 10.5 with the fast dual wideband. These are the turbosmart supersonic BOV's purchased from my man Matt @ New Era performance. :D The car pulls hard just need to finish the tuning and go run this bitch. :devil: 145 miles so far. Here is a little video I slapped together for the APS guy's who want to replace them.

http://i7.photobucket.com/albums/y25...th_JMG_APS.jpg

Reject Feb 2, 2008 07:35 PM

sounds like a spitting snake!!

xssive Feb 2, 2008 07:49 PM

You need to go ahead and bring that thing up here to Austin so I can get a ride. Im having withdrawals until I finish this damn notchback

JMBLOWNWS6 Feb 2, 2008 07:52 PM


Originally Posted by xssive (Post 8625574)
You need to go ahead and bring that thing up here to Austin so I can get a ride. Im having withdrawals until I finish this damn notchback

Shit Blake I had to get my rocks off in my 04 cobra untill I finished this :jest: You need to stop selling and changing your setup and get on with it. Im doing a notch right now :)

http://i7.photobucket.com/albums/y25...6/HPIM1653.jpg
http://i7.photobucket.com/albums/y25...6/HPIM1655.jpg
http://i7.photobucket.com/albums/y25...6/HPIM1659.jpg

JMBLOWNWS6 Feb 2, 2008 07:54 PM

OK I am going to bed. Need some sleep for the superbowl tomorrow! :devil:

xssive Feb 2, 2008 08:01 PM

Good to see those Kooks fit nicely. My final setup is a Novi 2000 on a forged 347. Should be a fun ride...

Derek @ EDO Feb 2, 2008 08:21 PM

Very nice BRO!!

RooRnZ28 Feb 2, 2008 08:31 PM

sick..... she sounds like a beast!! but, where were the in car vids??

Superman09 Feb 2, 2008 08:40 PM

Sounds great JM! Thanks for the vids! BTW, what did you do to close off the opening for routing the BOV's back to the air inlet?

SonnyG Feb 2, 2008 09:05 PM

Whats the best turbos for 600 whp on my dd?Have about $2gs 2 spend...
 
Ok Guys so let me start off first buy saying you guys are a bunch gods in my book.....I love all the the things you guys do to your cars such inspiration so much time such small funds lol.....

Ok well I was wondering what would be the best type of turbos in your opinions for a 600whp dd ls1 240sx w t56?...Yeah I know Im sick....
But Honestly I want the 600hp to "be on tap" Ive had several 4-5oo hp supras
t-birds on nos....But the useable power band suked imo,,,,
Electronic boost controllers rule.....

Would 2 to4e turbo's be good enough? I checked out the flow charts on them and each is good to about 575 with a max of 30 psi..(note on 4-6 cyl aps)
I'm thinking that i want 15 psi tops for the strip and about 8 psi for the street.

I've had two gt70r turbos on my supra and they were too peaky,,,,,
Nothing nothing nothing holy shiate holy shiate...nothing////

I already have an assortment of parts,basically a complete kit minus the turbos......

Also what type of mods would you reccomend?

I'm thinking at least cam,rod-bolts,bearings,metal head gasket, tb,wideband,water meth,injectors,fpr,fuel pump
and a greddy e-manage(these things are sick!!!)

Also what type of plugs you guys running by the way?And the gap?
I love the iridiums...they work great...

Thecarguy84@live.com

RAGENZ28 Feb 2, 2008 09:23 PM


Originally Posted by SonnyG (Post 8625986)
Ok Guys so let me start off first buy saying you guys are a bunch gods in my book.....I love all the the things you guys do to your cars such inspiration so much time such small funds lol.....

Ok well I was wondering what would be the best type of turbos in your opinions for a 600whp dd ls1 240sx w t56?...
Also what type of mods would you reccomend?



Thecarguy84@live.com

I would really think about doing pistons also, I don't think you'll need meth injection to get 600 hp, but you'll make more power and be able to run more boost so you could maybe set this up with a two stage boost controller for when you want your "race Mode", with turbos you really don't need to change the cam. Lower compression will let you run more boost and if your goal is to make an honest 600 hp on pump gas and you'll run it as it is I would run the smallest turbos you can find to meet your power goals. This way you'll get really fast spooling and if you stay with the stock rpm range you'll make a lot of usable power and won't have to add gear and a lot of other stuff. Having full boost from 3k-6k is awesome for a street car.

Reject Feb 2, 2008 09:31 PM

a thread hi-jack so suttle, so smooth....

Inspector12 Feb 2, 2008 11:14 PM

Sounded great JM I was waiting for a full pass there LOL!

venom ws7 Feb 2, 2008 11:24 PM

The car sound awesome man Congrats now we need in car vid PLZ.

JMBLOWNWS6 Feb 3, 2008 07:07 AM


Originally Posted by SonnyG (Post 8625986)
Ok Guys so let me start off first buy saying you guys are a bunch gods in my book.....I love all the the things you guys do to your cars such inspiration so much time such small funds lol.....

Ok well I was wondering what would be the best type of turbos in your opinions for a 600whp dd ls1 240sx w t56?...Yeah I know Im sick....
But Honestly I want the 600hp to "be on tap" Ive had several 4-5oo hp supras
t-birds on nos....But the useable power band suked imo,,,,
Electronic boost controllers rule.....

Would 2 to4e turbo's be good enough? I checked out the flow charts on them and each is good to about 575 with a max of 30 psi..(note on 4-6 cyl aps)
I'm thinking that i want 15 psi tops for the strip and about 8 psi for the street.

I've had two gt70r turbos on my supra and they were too peaky,,,,,
Nothing nothing nothing holy shiate holy shiate...nothing////

I already have an assortment of parts,basically a complete kit minus the turbos......

Also what type of mods would you reccomend?

I'm thinking at least cam,rod-bolts,bearings,metal head gasket, tb,wideband,water meth,injectors,fpr,fuel pump
and a greddy e-manage(these things are sick!!!)

Also what type of plugs you guys running by the way?And the gap?
I love the iridiums...they work great...

Thecarguy84@live.com

Do a search.

JMBLOWNWS6 Feb 3, 2008 07:10 AM


Originally Posted by Superman09 (Post 8625851)
Sounds great JM! Thanks for the vids! BTW, what did you do to close off the opening for routing the BOV's back to the air inlet?

:jest: If I told you,You would :jest: The size was hard to find. I went to ACE hardware after going everywhere and used these

http://www.duro-med.com/uploads/thum...-1371-9812.jpg


:jest: They are walker replacement caps :jest: It worked! :D

JMBLOWNWS6 Feb 3, 2008 07:10 AM


Originally Posted by reject (Post 8626134)
a thread hi-jack so suttle, so smooth....

+ 1000 :gtfo:

JMBLOWNWS6 Feb 3, 2008 07:11 AM


Originally Posted by Inspector12 (Post 8626694)
Sounded great JM I was waiting for a full pass there LOL!


HAHAHA Im still waiting for a video of your speed inc twin kit :devil:

JMBLOWNWS6 Feb 3, 2008 07:12 AM


Originally Posted by venom ws7 (Post 8626762)
The car sound awesome man Congrats now we need in car vid PLZ.

I ordered a HD cannon camera with a mount system. So Ill have something soon. Right now it would be a bitch to shift,drive and watch the AFR! :D

Websy21 Feb 3, 2008 07:27 AM


Originally Posted by JMBLOWNWS6 (Post 8627862)
I ordered a HD cannon camera with a mount system. So Ill have something soon. Right now it would be a bitch to shift,drive and watch the AFR! :D

Right on, I was gonna ask for the same thing. I got my vid camera a couple mnths backjsut to be ready for the same requests when I start my build on here b/c I know you'll wanna see them. Nice vid, can't wait to see a in car one. I love those vid the best, jsut watching the speed go from 20-120 in less than 10 seconds on the street spinnning in every gear :D Keep us updated bro!


All times are GMT -5. The time now is 11:21 PM.


© 2026 MH Sub I, LLC dba Internet Brands