F-Body D-1SC 8 rib tensioner pulley needed!
#1
Launching!
Thread Starter
iTrader: (14)
Join Date: Jun 2006
Location: Marysville, WA
Posts: 202
Likes: 0
Received 0 Likes
on
0 Posts
F-Body D-1SC 8 rib tensioner pulley needed!
Anyone got one?
I read something about using an OEM type that works fine....any ideas what application that might come off of so I can look it up.
I read something about using an OEM type that works fine....any ideas what application that might come off of so I can look it up.
#2
Search the web for Dayco HD Tensioners and Pulleys, there's a .pdf out there with the pulleys and dimensions on the back couple pages. I use 2 of the smooth ones and 1 8-rib and they are nicely built with double bearings and are about $40 at any Dayco dealer.
Jim
Jim
#4
Launching!
Thread Starter
iTrader: (14)
Join Date: Jun 2006
Location: Marysville, WA
Posts: 202
Likes: 0
Received 0 Likes
on
0 Posts
Found a Dayco HD pulley that worked perfectly! About 10mm larger in diameter but width was fine. Only thing is the bearing offset is slightly different so the belt does not ride perfectly in the center of the pulley. Might modify the shaft that the pulley rides on to bring the pulley a tad closer to the bracket.