ATI people please post ET's
 

I'm alittle concerned about some people saying that they didn't drop much time running the ATI kit??? I would like to see some ET's from more people running the ATI kit.

Re: ATI people please post ET's
 

Stock Engine at 10 PSI, Headers and SY3500 Stall, BFG DR:

10.98 @ 125.83 MPH Best
I was averaging low 11's (11:22, 11:11, etc.)

At 5 PSI, stock exhaust, SY3500 stall and Nitto 555R DR:

11.92 @ 115.32 MPH

Re: ATI people please post ET's
 

10.79 @ 125 is best run to date, but I've went 128+ in the past couple trips to the track but no traction kept me from a new best ET.
Tom

Re: ATI people please post ET's
 

Went 10.91@126.65.H/C 370 iron block@ 3840 lbs.Car was a 6sp with a new drag racer behind the wheel.With a TH400 with brake the car would have probably went 10.6 10.7s.Replaced 15 belts in 25 passes and 1500 street miles.Should have a video of my best pass up soon.

Re: ATI people please post ET's
 

It's cool to see some low ET's. I was starting to have thoughts of building the motor to handle a 200hp shot of NOS instead of the blower. :)
Does anyone sell a cog setup for the ATI kit? I remember someone selling them awhile back.

Re: ATI people please post ET's
 

I went 10.30 at 133.84, best mph is 135.19. that is at 15 psi. Ill have the trans brake going in this week and the new convertor 4400 stall. so I hopefully will be about 139 mph and 9.90's.

Re: ATI people please post ET's
 

why all the M6->A4 crossovers?

Who is the fastest, full interior M6 right now?


Mike

Re: ATI people please post ET's
 

Scott,
You have a very impressive car. I'm only going to run the P1SC so I'm not expecting real low ET's. Maybe I'm wrong here but I've been told to keep the stall on the small side. Isn't 4400rpm alittle too big? Can't wait to see you hit the 9's. Keep up the good work.

Re: ATI people please post ET's
 

I would not go higher than 3500 Stall for a street-driven car... but, some guys are willing to put up with a lot to go faster at the track. :D

Re: ATI people please post ET's
 

you got that right mike.

02blackws6, I went with the big stall so I can leave in boost. off the brake I should be at about 7 psi. thats launching at over 500 hp right off the bat.