lt1 with p1sc need combo idea's
 

i have an ATI p1sc with front mount intercooler,delteq ignition, 1.6 GM RR's, i wanna do a budget build that will stay together and it is for street use so reliablility is the key hear not really peak numbers.i know i need injectors, tuning and a cam but hwat size i need less than .570 lift with these rockers, the car is a six speed with 4.11's and stock 10 bolt. but with gas the way it is i may g back with a higher gear set. any help would be appreciated, my heads have been decked.020 and ported. and i have a SPEC Stage 3 cluth for it

no ideas??

Get a used cam,new pistons,new rod bolts.42 pound injectors, get new valve springs the lt4 springs are only good to .525.

ditch the 10 bolt you put any kind of sticky tire on there and your gonna be running on borrowed time. I have seen a few lsx bolt on cars break them.

i am actually going to mini tub or back half and 4 link it so the rear end will not be an option, it will be a 9" ford , dana 60 , or a 8 3/4 mopar rear.