FINALLY GUYS!!Pics of my APS 35th LE
#22
TECH Fanatic
Thread Starter
iTrader: (59)
Join Date: Jan 2007
Location: Pittsburgh,Pa
Posts: 1,736
Likes: 0
Received 0 Likes
on
0 Posts
OCD disorder LOL
Sebring silver my man !!Just the right amount of metal flake in the silver without looking tacky or trashy LOL I did the intercooler the same color My body man said ED:Why do you want me to spray the whole thing when only 5" is going to be sticking out the top LOL!!I said Dude, When you remodeling your kitchen floor, Do you do the whole floor or do you leave the stove & freigerator where there at and do the new floor around them ? or do you move them and do it right? LOL!!Same exact thing guy!!! is what i told him I swear to GOD! I was going to take it somewhere else ,just for princeable!!!LOL!!!Non taken pride in his work piece of **** LOL!! I own and operate a tree service and one thing i hate more then anything in this world is somebody that doesnt take pride in there **** or work LOL!!Both reflect who you are as a personAs you can see from my car I have OCD which im OK with LOL!!But my wife hates it
#24
TECH Fanatic
Thread Starter
iTrader: (59)
Join Date: Jan 2007
Location: Pittsburgh,Pa
Posts: 1,736
Likes: 0
Received 0 Likes
on
0 Posts
I didn't like the finish on the intercooler from the door LOL!!The first thing i did ((First Day Owning))LOL!!was grinded off the APS and left the twin turbo intercooled letters underneith, because my original plans were to put 2 red SS's above the lettering. Well, After i grinded off the Aps, I had the whole intercooler sanded and painted Sebring Silver and bought a tiny detailing brush and painted the twin turbo intercooled letters with a bright red ,but the casting was so bad that i ended up taking a soft pad to them LOL!!and took them off too !! and repainted it again with the Sebring silver,(( Base /Clear))Mind you, I had these blow off valves welded in first before anything and took a small round file and took down the welds to where it looked like the bungs were cast into the intercooler
#26
TECH Fanatic
Thread Starter
iTrader: (59)
Join Date: Jan 2007
Location: Pittsburgh,Pa
Posts: 1,736
Likes: 0
Received 0 Likes
on
0 Posts
I kinda had no other choice because of where and how my Globle West Track Torque arm mounts ,I would have had to turn the filter 90Degs ((sideways to the fuel line)) with sharp 45 connectors, which i didnt want to do to a fuel line, espesecially under boost when that secound pumps kicken in LOL!!Its easy to get to and adds alittle bling up there !!
#27
TECH Fanatic
Thread Starter
iTrader: (59)
Join Date: Jan 2007
Location: Pittsburgh,Pa
Posts: 1,736
Likes: 0
Received 0 Likes
on
0 Posts
Thanks, Its a street car ! Not a strickly track car!! I built it to enjoy it LOL Im not looking to get into record books Timeslips, Etc,Im looking to pick up some ***** !!!Cats LOL I love animals, Dont you guys too????LOL!!