Got the firehawk on the dyno It Went 788 Hp And 778tq At 16 Psi And 808hp 800tq With A 75 Shot And 14 Psi this is on 91 with no Methanol/water |
sounds like one badazz hawk!!! maybe someday we can tango at a firehawk rally |
Those are some hella good numbers...You have any timeslips yet? |
Nice numbers. Anymore info on the set up or any pictures? glenn |
i am going to the track to night with the 6 speed in it it is slow with the 6 speed in it w8n2sqz their is some more info https://ls1tech.com/forums/showthrea...light=1+wicked |
Very Nice!! :cool: |
Is your car a bit doggy offboost with the 8.2 CR. I would think the 4.10 gears would help in that area though. Wo9uld have been interesting to see the nitrous shot at 16psi.And interesting to see what power you get with the snow system working as well. Its not exactly fast to switch out trannies for track and street but guess whatever floats your boat. I would expect some awesome times from your car with either trans. Local third gen guy just threw together a fairly homebade setup with t70 on a forged piston 350 and is running 11.58 at 125mph and not even close to potential. I am hoping to be getting near you power levels with also small shots of spray. I would think it spools instant with the spray. Not sure what a blizz boost cooler is or why you would need it with nitrous. |
What CID engine are you running |
Is that blitz boost controller? |
Originally Posted by MY99TAWS6
(Post 9598995)
Is that blitz boost controller? it is a stock 6.0l block 364cid |
Awesome keep us posted. That's way too much gear probably. |
any videos???.....my hawk going to the dyno in a few weeks....:D |
yes it is i went 11.38 at 128 mph with 315 nittos and hit 7000 at the 1/4 i need to go to a 3.42 i will upload some video monday |
Go with 3.42 if you have the stock 10 bolt and 3.50's when you put the 9in. in. Those will help with the turbo spool as well. I am pretty sure you don't build any boost in 1st. gear now? |
what maifolds/headers are you using? any pics of those? |
Originally Posted by HUNTER02SS
(Post 9603533)
Go with 3.42 if you have the stock 10 bolt and 3.50's when you put the 9in. in. Those will help with the turbo spool as well. I am pretty sure you don't build any boost in 1st. gear now? i have a 12 bolt in it now yes i can hit 10 psi in frist gear :nod::D |
Originally Posted by 4SFEDZ
(Post 9603643)
what maifolds/headers are you using? any pics of those? |
All times are GMT -5. The time now is 03:52 AM. |
© 2024 MH Sub I, LLC dba Internet Brands