Fueling & Injection Fuel Pumps | Injectors | Rails | Regulators | Tanks

DIY dual pump question?????

Thread Tools
 
Search this Thread
 
Old 09-20-2009, 12:44 PM
  #1  
Launching!
Thread Starter
iTrader: (8)
 
Kiss_My_99SS's Avatar
 
Join Date: Apr 2005
Location: TN
Posts: 203
Likes: 0
Received 0 Likes on 0 Posts

Default DIY dual pump question?????

When you do the dual intank pumps do you leave the factory reglator in the tank or remove it?????
Old 09-20-2009, 06:02 PM
  #2  
11 Second Club
iTrader: (3)
 
cabel1's Avatar
 
Join Date: Sep 2007
Location: Wisconsin
Posts: 233
Likes: 0
Received 0 Likes on 0 Posts
Default

I just finished mine up yesterday. i left the regulator in the tank. I now have 65psi driving and 58 at WOT on the motor. I was at 50 at WOT on motor before and 42 spraying with the Racetronics. Will no Friday if this works on the spray.
Old 09-20-2009, 06:54 PM
  #3  
Launching!
Thread Starter
iTrader: (8)
 
Kiss_My_99SS's Avatar
 
Join Date: Apr 2005
Location: TN
Posts: 203
Likes: 0
Received 0 Likes on 0 Posts

Default

I think im gonna take mine out it wont let me lower pressure below 61psi at idle...It kinda makes it hard to adjust the fpr on the rail...
Old 09-21-2009, 05:47 AM
  #4  
11 Second Club
iTrader: (3)
 
cabel1's Avatar
 
Join Date: Sep 2007
Location: Wisconsin
Posts: 233
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by Kiss_My_99SS
I think im gonna take mine out it wont let me lower pressure below 61psi at idle...It kinda makes it hard to adjust the fpr on the rail...
I don't have one on the rail.




All times are GMT -5. The time now is 06:55 AM.