Fuel setup for this cam?
#1
Teching In
Thread Starter
iTrader: (2)
Join Date: Aug 2011
Location: Manhattan, KS
Posts: 40
Likes: 0
Received 0 Likes
on
0 Posts
Fuel setup for this cam?
Ordered a 233/239 112 LSA, with .650 dual springs.
01 SS, A4 will be installing SS3600 converter from yank.
I will have polished stock heads with this setup.
When I called and talked to texas speed they suggested getting F.A.S.T. 36lb. injectors. https://www.texas-speed.com/p-174-fa...ons-legal.aspx
Will these be correct for my setup? Is the stock fuel pump fine, I just need the injectors?
Will the injectors make a noticeable difference?
Thanks guys.
01 SS, A4 will be installing SS3600 converter from yank.
I will have polished stock heads with this setup.
When I called and talked to texas speed they suggested getting F.A.S.T. 36lb. injectors. https://www.texas-speed.com/p-174-fa...ons-legal.aspx
Will these be correct for my setup? Is the stock fuel pump fine, I just need the injectors?
Will the injectors make a noticeable difference?
Thanks guys.
#2
On The Tree
iTrader: (6)
Join Date: Jul 2010
Location: Acworth Georgia
Posts: 103
Likes: 0
Received 0 Likes
on
0 Posts
You will need injectors. The Fast is just to pricy for my taste. I had the factory 28 lb. injectors with a torquer V2 and my injector duty cycles were like at 92 percent. I went with racetronix 42's. That cam is even bigger so you will probably be at 100 percent at wide open throttle. Thats not good. The injector is just continously spraying with no breaks in burst. This will lead to premature injector failure. So injectors are a must. The FAST intake is all on you. But man that a stiff price for two pieces of injection molded plastic. I used to work in the injection molding business and you would not believe how inexpensive they are to make.
Trending Topics
#8
TECH Resident
iTrader: (17)
Join Date: Sep 2004
Location: NC - Charlotte area
Posts: 3,747
Likes: 0
Received 0 Likes
on
0 Posts
if Naturally aspirated and you have a cam and/or heads mods you will be fine with 36# or 42#, whichever you like. both will run fine, 42 will leave more breathing room.
if you want data with injectors call vendors and ask if they can provide it. I will guarantee if you purchase 36# or 42# with a cam/head ls1 or even ls2 they will run fine if you go in the tune and change the IFR table and look at the injectors min pulsewidth and slightly lower the min pulsewidth and short pulse adder tables, and set the short pulse limit to 2.5.
you will still likely have to tune the VE table but that is the basics of it
if you want data with injectors call vendors and ask if they can provide it. I will guarantee if you purchase 36# or 42# with a cam/head ls1 or even ls2 they will run fine if you go in the tune and change the IFR table and look at the injectors min pulsewidth and slightly lower the min pulsewidth and short pulse adder tables, and set the short pulse limit to 2.5.
you will still likely have to tune the VE table but that is the basics of it