Victor Jr How to drill to install injectors?
#1
TECH Fanatic
Thread Starter
Victor Jr How to drill to install injectors?
Title says it all. Im changing my setup, and I scored a Victor Jr Carb intake. It has boss for intake to be drilled for injectors, so what size drill bit do I need to use, and seem they need to be at a angle? Any info on installing injectors would be great. My plan is to change from the LS1 intake, install the Vic with a Elbow with a stock TB. Anyone can give info on this?
#4
TECH Fanatic
Thread Starter
Well I was hoping it wasnt that hard to drill being alum, anyone wont to trade a carb intake for a EFI Victor Jr? Still if anyones done this let me know.
#7
On The Tree
Join Date: Sep 2008
Location: Virgina Beach
Posts: 180
Likes: 0
Received 0 Likes
on
0 Posts
I know there's a special injector drill bit you can score. I just didn't want to tackle it myself thinking the angle had to be perfect. So really, how'd ya do it?
Trending Topics
#9
#11
Title says it all. Im changing my setup, and I scored a Victor Jr Carb intake. It has boss for intake to be drilled for injectors, so what size drill bit do I need to use, and seem they need to be at a angle? Any info on installing injectors would be great. My plan is to change from the LS1 intake, install the Vic with a Elbow with a stock TB. Anyone can give info on this?
#12
TECH Fanatic
Thread Starter
Wasnt that hard. Took a micrometer check size of injectors, knowing the O-rings will make it a tight fit. Fond the center of each pad, and took a 5/8 socket lay it flush on the pad used a small bit to start drilling thru the center of the 5/8 socket. Found a bit the right size, after three smaller sizes to cut slow.Im using after market rails, I just used the old truck rails to check the fit.