Help!! LS1 Fuel crossover question
#1
Staging Lane
Thread Starter
iTrader: (5)
Join Date: Oct 2013
Posts: 64
Likes: 0
Received 0 Likes
on
0 Posts
Help!! LS1 Fuel crossover question
I got new fuel rails and gonna order a crossover fuel line for it.. My question is can I run the crossover on the back of the rails and use a Tee fitting for fuel line? Just looking to keep it as clean looking in engine compartment as possible
Last edited by jaycoy65; 11-02-2015 at 09:22 AM.
#4
Staging Lane
Thread Starter
iTrader: (5)
Join Date: Oct 2013
Posts: 64
Likes: 0
Received 0 Likes
on
0 Posts
I don't see it.. Looks like they have the crossover on the back side then feed coming in on the drivers side front.. I want to run the crossover in the rear with a Tee on the passenger side to connect to the feed and to the rail
#5
TECH Addict
iTrader: (1)
Don't see why it wouldn't work. It's going to fill the rails anyway. I imagine you're talking about the line coming from the pump to one side of the tee, straight through the "run" of the tee to one rail and the leg going to the other rail? Don't see why it'd be a problem.