Fueling & Injection Fuel Pumps | Injectors | Rails | Regulators | Tanks

Looking for dual or triple 450 with universal bolt in top hat

Thread Tools
 
Search this Thread
 
Old 09-09-2017, 06:21 AM
  #1  
TECH Apprentice
Thread Starter
iTrader: (7)
 
00duvall's Avatar
 
Join Date: Mar 2004
Posts: 368
Received 0 Likes on 0 Posts

Default Looking for dual or triple 450 with universal bolt in top hat

Im looking to run dual 450 or triple 450 with a bolt in top hat. Is there any one out there that makes a setup like this? I have a aeromotive stealth fuel cell 20gal with a1000 already. I was either going to add dual 450s and run with the a1000 or just remove the a1000 and run triple pump setup.Run gas now but want to step up to e85. I have 10 ptfe feed and 8 return alreday.427 with twin precision 7275s. What would the twin 450s get me on e85 hp wise? Looking for 1100 to 1200rwhp. Thanks
Old 09-19-2017, 01:37 PM
  #2  
9 Second Club
 
stevieturbo's Avatar
 
Join Date: Nov 2003
Location: Norn Iron
Posts: 13,616
Received 179 Likes on 154 Posts

Default

I've searched for may hangers etc like you mention and of all of them the only one I liked was this ( and should hopefully be getting it tomorrow from the postal ***** who want their taxes paid on it )

http://www.aftermarketindustries.com...-hanger-fs1200

Quite expensive, but by far the best.

Most others I found either had ***** wiring connections, all pumps wired through 2 terminals so you couldnt run pumps individually and/or ***** wiring pass through setups.

The only other one I seriously considered was this, but needing an 8" hole up top seemed a bit OTT and would have been too awkward to install onto my tank.

https://www.aeroflowperformance.com/...e-pump-hangers

There are some US based hangers, Power House Racing was one and think I found a few others. None of them had any appeal though. They had some nice features, most were poor when it came to getting wires in/out
Old 09-19-2017, 01:46 PM
  #3  
TECH Apprentice
Thread Starter
iTrader: (7)
 
00duvall's Avatar
 
Join Date: Mar 2004
Posts: 368
Received 0 Likes on 0 Posts

Default

Thanks for reply.I have looked at both these. The aeroflow is cheap price for what u get but u cant stage ur pumps all 3 would run constantly and the aed hangers are salty. I have been in talks with ricks tanks and his price is up there also but its pretty nice set up. Module, billit top hat and triple 450 for 1200$. I have also looked into fuelabs prodigy 1800 pump. They said 1 pump would work? Pump is 750 and hanger module is 95.Have u heard of anyone running this pump?
Old 09-19-2017, 01:52 PM
  #4  
9 Second Club
 
stevieturbo's Avatar
 
Join Date: Nov 2003
Location: Norn Iron
Posts: 13,616
Received 179 Likes on 154 Posts

Default

I'm sure some big pumps could probably do it ( very few though...it's a lot of fuel for E85 )

But the Walbros are cheap and usually reliable. Hard to argue with that.


Quickest car I know of using the triple hanger in the UK is a GTR that runs 7.7 at 179mph. That's 3 x Walbro 450's on E85. Power would be well above 1200 though.
They also use a voltage booster on their primary 450, but only on the one pump.



Quick Reply: Looking for dual or triple 450 with universal bolt in top hat



All times are GMT -5. The time now is 01:45 PM.