biggest high impedence injectors
#1
FormerVendor
Thread Starter
iTrader: (3)
Join Date: Jun 2007
Location: Virginia Beach,Virginia
Posts: 2,991
Likes: 0
Received 2 Likes
on
2 Posts
biggest high impedence injectors
looking for high impedence 80-90 lb injectors for 1000hp supercharged LS7 build,trying to use stock ecm,any help would be greatly appreciated
Last edited by Shawn @ VA Speed; 07-12-2007 at 09:02 AM. Reason: mistake
#3
Originally Posted by LS1curious
85pph run at 60 psi flow 92pph. there are also 96pph. chech MSD they sell them.
I run an Acceleronics Versafueler with 84 lb/hr on my stock ECM.
#4
FormerVendor
Thread Starter
iTrader: (3)
Join Date: Jun 2007
Location: Virginia Beach,Virginia
Posts: 2,991
Likes: 0
Received 2 Likes
on
2 Posts
Originally Posted by engineermike
I think those are low impedence.
I run an Acceleronics Versafueler with 84 lb/hr on my stock ECM.
I run an Acceleronics Versafueler with 84 lb/hr on my stock ECM.
Trying to stay away from additional boxes,engine is going into a high end 69 camaro,want to make is as clean as possible,might have to use a big stuff 3
Trending Topics
#9
Ugh i missread the thread title. eyes saw one thing brain saw another.the largest High Impedence injector that I know of that actually works halfway decent is the 60pph mototron/siemens unit. It flows 72pph at 60 psi of fuel pressure. Its base rating is at 43.5 JIC you didn't know.
The RC injectors every set I have ever seen are absolute junk. that pintle design bosch injector really get hairy aroun 50pph on a small engine. Not to mention its very poor dynamic response.
Stick with PICO style High Z injectors or switch to Low z.
If ya run a BS3 then Low impedence is a Non Problem.
The RC injectors every set I have ever seen are absolute junk. that pintle design bosch injector really get hairy aroun 50pph on a small engine. Not to mention its very poor dynamic response.
Stick with PICO style High Z injectors or switch to Low z.
If ya run a BS3 then Low impedence is a Non Problem.
Originally Posted by ss1
I believe RC Engineering makes a 75lb high impedance injector. There was a set for sale in the classifieds around a month ago.