jesse maldonado

Took the driveshaft out to change u joints and noticed something moving inside the driveshaft...it moves front to back but not side to side.is this normal guys


Here's a link to video I made of it..

Watch "2448885" on YouTube
https://youtu.be/7K1fSEPo_Eg

ss.slp.ls1

iTrader: (36)

^^^That is post #1, did you delete your original post?

Edit: Looks like you edited your post, I watched the video. I haven't noticed a driveshaft do that before, however I don't think I've ever shook one back and forth like that before. I think I would still use it if you haven't noticed any vibrations. However, a used replacement won't cost that much.

jesse maldonado

Thanks for the reply it actually is making a noise a clunk everytime I I make a right or left at slow speeds to pull into a parking spot other than that everything is fine...I've replaced every suspension piece hoping to stop this clunk and nothing worked the only thing left back there is thr drive shaft and Differential and was hoping this noise in the driveshaft was it

ss.slp.ls1

iTrader: (36)

Have you checked your ball joints?

pdxmotorhead

I've seen the scraper thats usually spot welded inside the drive line at the slip joint come off and rattle around in the drive line (If your driveline has the slip joint, I can't view the video)

jesse maldonado

You can go to youtube an type in 2448885 to watch thr video

jesse maldonado

Don't think it's thr ball joints the sound is definitely coming from the back...but thanks for the reply