9” rear end make?
#1
9” rear end make?
Hey guys,
So I just bought a 99 Camaro z28. The car has an aftermarket 9” rear end. The owner had NO idea the brand of rear end. I got under the car today and snapped a few pictures (bad quality). I also noticed on the rear end it had ME - 008 stamped on it. Maybe a MOSER? Any help is appreciated.
Also trying to determine the gear ratio. I think he had the speedo calibrated for the new gears cuz it’s only
off like 2km/h. When doing 100km/hr or 60 miles/hour it’s sitting at 2100 rpm with a 275/40R17 tire. Any guesses on the ratio? Car is an A4.
#4
TECH Fanatic
Unless it's different from a stock A4 Trans Am, it's a 2.73...which is what I have.
Did you know the rear was aftermarket before you bought it?
Did you know the rear was aftermarket before you bought it?
Last edited by TA_Freak; 08-04-2018 at 09:51 PM. Reason: Change the reply to non-quote.
#6
TECH Fanatic
Trending Topics
#8
Well I got my car up on the hoist today and found a serial tag on the center section showing “Strange Engineering” and a serial number. Is it likely that strange would have specific information on this center section? Also is this common to have a Moser housing with strange center section?