JurisAg02

I currently have a 10-bolt rear end with Richmond 4.10's in it and a Moser T/A girdle. This is the first time the rear end will go into the car and I just put the girdle on the ten bolt. I have purchased a few bottles of 75/90 Royal Purple with limited slip additive mixed with the gear oil. My first question, what is your experience with Richmond 4.10 gears? I was also wondering what your experiences were with Royal Purple 75/90 gear oil w/ limited slip additive. Finally, how much gear oil am I supposed to put in my ten bolt with the 4.10's and Moser T/A girdle?

thanks,
Rick

JurisAg02

anyone?

ss rally red

iTrader: (8)

I have Strange 4.10's same cover and i run 75/140 synthetic gear oil in mine, your choice of fluid is fine and Richmond gears are as good as any As far as you fill, just put as much in in as you can untill it runs out of the fill hole

GuitsBoy

iTrader: (4)

Richmonds are supposedly hard (some say strong, others say brittle) and noisy. Gear whine dosnt bother me too much, but my motives are practically silent.