a few noises in my Moser 9" ok well I am completely lost as to why my rear is making these noises, but here goes. When I hit bumps the rear sounds like it is "loose" ( I am talking baout the entire rear) it makes a kind of clunk noise but as I said it just sounds as if it is loose somewhere, I have looked at it, checked some bolts and pushed/ used a rubber malet to try and find out where it is coming from but came up with nothing. The other noise is sort of random, sometimes when I am driving it will make a very odd noise, though the rear feels solid when you get down on it or normal driving. The noise comes from the driver side and sounds almost like a changing gears sort of sound mixed with a whine. ( like I stated before it is not something I have never heard before and is very hard to describe) With all that said the rear doesn't feel like it anything a badly hurt, it still feels fine while driving. Anyone have any idea what this could be? Thanks in advance |
Make sure the panhard bar and the torque arm are not hitting the sheetmetal of the body. We have to sometimes use a pry bar to gain a little clearance in these areas. Bob |
well if you are referring to where the torque arm is bolted to the rear, it has already been done. But I know what you mean. The clunk noise isn't a violent niose, as I said it just sounds loose, I have had the rear/torque arm hit the bottom before and this sounds nothing like it. It sounds as if a bolt somewhere has backed out a little so the rear would move around when I hit a bump. I am completely lost as to these 2 noises HELP PLEASE! |
anyone?? |
is the sway bar very close to the mounting point for the t/a |
no it is about the same distance as a stock rear |
|
I see you circled something but I can't really tell what it is. |
yellow is the sway bar red circle is where mine hits http://img513.imageshack.us/img513/7639/img5426fo7.jpg |
ahh ok, I don't think my swaybar is hitting the T/A but I will check to make sure. ANy ideas on the other noise? As I described it earlier is about th best I can do, other than maybe a garbled whine? |
do you have rod ended suspension components? I have poly/rod combo all around it and thats exactly how i would describe the noises. Just sounds like there's play in every joint. Just wish i could find the damn thing thats loose and tighten it! Unofrtunately, nothing is loose :( |
well the knock/clank noise could be the suspension but the other, I really doubt it but I don't know, the wierd garbled niose coming from the driver side rear only happens while driving and it is completely random, sometimes while I am turning others just driving straight...... |
ttt need help |
Do you have the factory torque arm? I have seen them break, as you can see here. http://www.exoticperformanceplus.com...php?service=58 Bob |
yes I have the factory torque arm and I have a chrome moly one waiting to go in, but the T/A is not broken, thats why I am lost to all these noises. The rear doesn't make noise when I get on it, just when I hit bumps. The garbled whine happens randomly and comes from the driver side. I have checked everything I can think of and have found nothing. Also this may help but the Low Trac light lights up when I hit bumps as well and after it does that a few times ABS INOP light comes on and the ASR OFF at the same time maybe something to do with that? |
ttt anyone have any idea? |
I have a DLS 9" with a Moser housing. I've been chasing the "phantom clunk" for over a year now. Sometimes it does it, sometimes it doesn't. I've torqued, retorqued, retorqued, retorqued and retorqued all the bolts/nuts. Then I'll torque them again. I can't find any rub marks or signs of anything hitting. It's basically the same noise and conditions you're describing. I have been told that my poly/rod end PHR and LCAs have something, if not everything to do with it. Looks like I'm in the same boat as 02NBMWS6. |
ok as for the other noise (garbled whine) anyone have any ideas? |
Originally Posted by Demon_Speeding I have a DLS 9" with a Moser housing. I've been chasing the "phantom clunk" for over a year now. Sometimes it does it, sometimes it doesn't. |
it does't feel loose over bumps, it just sounds loose? if it feels loose it could be a bunch of stuff, but maybe check to see if the springs are seated up top properly? i get a noise over bumps since installing my 9", but its more of a squeak; it comes from the upper mount on passenger side shock. |
All times are GMT -5. The time now is 03:15 AM. |
© 2024 MH Sub I, LLC dba Internet Brands