Finally Installing my 9" !!!!
Finally Installing my 9" !!!! After about 2 months of sitting on all the parts... I'm finally installing my Moser 9" with 3.70 gears.... getting it done on saturday.
Any tips or tricks to get this badboy up?
Im also installing Adjustable Panhard bar, torque arm, torque arm relocation, sway bar, lower control arms, and control arm relocation brackets.
So i get a completely new rearend suspension at the same time.... w00t
Any tips or tricks to get this badboy up?
Im also installing Adjustable Panhard bar, torque arm, torque arm relocation, sway bar, lower control arms, and control arm relocation brackets.
So i get a completely new rearend suspension at the same time.... w00t
Best tip I can give ya is go to www.markwilliams.com and www.rosslertrans.com and read how to properly set a pinion angle........most missed angle in the suspension.
Also, the Sept issue of GMHitech mag has a good suspension article.
Good luck.
Also, the Sept issue of GMHitech mag has a good suspension article.
Good luck.
