brandon_01_ta

already have 4.10's in my car but i f'ed them up from a stupid mistake... don't know what brand they were... i'm getting a new set, so what brand do i go with and what is a good price? think i saw them for about $180 a set at Summitt
i'm trying to decide between Richmond and Motive... don't know much about either really...

Jays00ss

iTrader: (1)

I have motive Performance 3.90's in my 10 bolt very happy with them. I just bought my 9" yesturday and opted for the Motive 4.30's should be here next week.

Silas2k

iTrader: (5)

the general consensus on this board seems to prefer motive, i bought some but havent had time to get them in yet so i cant speak from experience, a lot say that richmond tend to make more noise

brandon_01_ta

yea i have heard the richmond are pretty noisy... not really heard much on the Motive tho
so you have 3.90?? i didn't know u could get 3.90's for the 10 bolt?! maybe i should go with those instead of the 4.10's....
can someone tell me if this install kit will be good to use if i were to get the Motive's..and if it will be all i need to get...

http://store.summitracing.com/partde...rt=RMG-8310441

alamantia

iTrader: (10)

buy AAM

Randy WS6

iTrader: (69)

Motive+

Black FormulaLs1

iTrader: (10)

i have blown up both motive and richmond 3:73's jn my 10 bolt..so which ever you can get a better deal on...IMO

mzoomora

iTrader: (36)

Agreed. Then Motive second.

Randy WS6

iTrader: (69)

I run the 8.8" 4:30 Motive (Plus), its the racing gear and Ive broke three poss. units in haft, across the cross pin, but steal have the same gears . But i have broke the standard Motive gears throw

SREETRACEGUY

iTrader: (13)

i started out with motive and i liked them the hole two weeks they lasted replased them with richmond gears and royal purple fluid they have been in there for bout ohh 1.5 years i guess and still strong and not noise

brandon_01_ta

anybody else?? i could another day or two before i'm going to order them... as of right now i'm leaning more towards the Motive's

SREETRACEGUY

iTrader: (13)

good luck with them i had the motive race series and i filled half of a 32 oz gaderade bottle with the peices

00LS1TA

I have had great luck with Motive gears, Ive broken 4 sets of Richmond gears, but Im pretty had on my gears. But I wouldnt install gears unless your going to install the auburn or any other after market posi. Heres some good deals on so sets of gears, http://stores.ebay.com/Kennedy-Off-Road

ChocoTaco369

Motive makes a quieter gear on average, Richmond makes a stronger gear. Richmond is definitely a higher quality product - and you'll pay a little more for them - but they do make some noise. My car's at the shop as we speak getting the gears reshimmed and tightened.

RoDan

False on the richmonds being stronger, they are more brittle. Get US Motive 4.10's not the Italian 4.11's, trust me.

SREETRACEGUY

iTrader: (13)

i had the good motives and the richmonds you just have to go with one or the other till you get a set that will hold i guess but i will never by motive again just by my past with them and i to would not just change gears i gotta auburn pro street in one car and detroit trutrac in the other

echo3313

iTrader: (3)

i have always been told just stick with gm. i just ordered some gm 4.10's. with a 10-bolt they are supposed to be the only right way to go. They make 0 noise

TA1364

iTrader: (11)

Im putting in motive 373s, we'll see how long these last. The gear noise all depends on setting them up right, i dont think we need to go here again.

brandon_01_ta

well i'm not really worried about noise.. right now it's my daily driver but soon to be a weekend car only.. and it's not going to see any track time, just a street race here and there... and i prob wont do anymore mods... so i'm going with 4.10's and i think i'm gonna go with the motive's.... question tho, what installation kit do i need to get if i get the Motive's off of Summitt... here they are: http://store.summitracing.com/partde...5&autoview=sku

is that the ones i need? and what installation kit should i get with it?? thanks!

BriancWS6

iTrader: (18)

I have been running Motive 4.10s in my 10 bolt for a while. I blew the posi, but the gears have held.