Richmond 4.10 gears
#1
Teching In
Thread Starter
Join Date: Mar 2010
Location: City of Angels
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
Richmond 4.10 gears
Thinking about getting a set but there's been at least a couple reported failures. Any other people have experience here? Don't wanna drop $1000+ only to have the teeth knocked out after 100 miles.
#3
12 Second Club
iTrader: (6)
Join Date: Apr 2006
Location: Rochester, NY
Posts: 456
Likes: 0
Received 0 Likes
on
0 Posts
yea I haven't heard of many bad cases of these. There have been bad batches of gears before, but it is likely an install issue. We have the Richmond 4.10 and 3.73 gears as well as kits available on our website (see sig)
#4
LS1TECH & TRUCKS Sponsor
iTrader: (15)
Join Date: Jul 2004
Location: Lubbock,Tx
Posts: 84
Likes: 0
Received 0 Likes
on
0 Posts
Check this out!!!!
We are celebrating July 4th with this special deal...
http://sdparts.com/details/scoggin-d...-center/sdgk-3
Let us know if we can help you!
http://sdparts.com/details/scoggin-d...-center/sdgk-3
Let us know if we can help you!
#5
10 Second Club
iTrader: (4)
Join Date: Oct 2006
Location: wisconsin
Posts: 855
Likes: 0
Received 0 Likes
on
0 Posts
We are celebrating July 4th with this special deal...
http://sdparts.com/details/scoggin-d...-center/sdgk-3
Let us know if we can help you!
http://sdparts.com/details/scoggin-d...-center/sdgk-3
Let us know if we can help you!
#6
FormerVendor
iTrader: (14)
Join Date: Mar 2010
Location: Pompano Beach, FL
Posts: 393
Likes: 0
Received 0 Likes
on
0 Posts
We always recommend the full install kit, even on low mileage vehicles (just our experience). Nothing worse than fishing around for additional parts in the middle of a job! Just our $0.02. Either way, always support your sponsors!
We also carry the gears and complete install kit/fluids.
Erik@Lashway
We also carry the gears and complete install kit/fluids.
Erik@Lashway
#7
12 Second Club
iTrader: (6)
Join Date: Apr 2006
Location: Rochester, NY
Posts: 456
Likes: 0
Received 0 Likes
on
0 Posts
We always recommend the full install kit, even on low mileage vehicles (just our experience). Nothing worse than fishing around for additional parts in the middle of a job! Just our $0.02. Either way, always support your sponsors!
We also carry the gears and complete install kit/fluids.
Erik@Lashway
We also carry the gears and complete install kit/fluids.
Erik@Lashway
We also recommend the full install kit. It is the only kit we will use with in shop installs.
Trending Topics
#8
Launching!
Join Date: Feb 2010
Location: south florida
Posts: 285
Likes: 0
Received 0 Likes
on
0 Posts
We just did a gear swap to 4.10 richmond no problems whatsoever.No noise at all and a durable gear when installed properly.
#9
and all the sets with failures were improperly installed? don't bet on it. several very reputable shops have had failures. there is an issue with the gears that richmond hasn't admitted as of yet
#11
Launching!
Join Date: Feb 2010
Location: south florida
Posts: 285
Likes: 0
Received 0 Likes
on
0 Posts
I did not say all failures are due to improper installation.If you do gear swaps enough you will see some failures in gears and sometimes there are bad batches of gears from the manufacture i set up a fair amount rears and very rarely ever have a problem.Are you saying that richmond in general is having a problem or is it specific to the new generation camaros?I have done about 4 in the past couple months and no issues.Any "reputable" shop can have problems its just part of the business.
#15
10 Second Club
iTrader: (4)
Join Date: Oct 2006
Location: wisconsin
Posts: 855
Likes: 0
Received 0 Likes
on
0 Posts
nickey chevrolet and jannetty racing have reported failures of these gears with a perfect install.
richmond gear wouldnt even send 1 of the bad sets back to the owner after they did there testing,, the owner wanted to do some independent hardness testing so richmond just gave him his money back instead of sending him back the bad gears.
richmond gear wouldnt even send 1 of the bad sets back to the owner after they did there testing,, the owner wanted to do some independent hardness testing so richmond just gave him his money back instead of sending him back the bad gears.
#16
TECH Fanatic
iTrader: (3)
nickey chevrolet and jannetty racing have reported failures of these gears with a perfect install.
richmond gear wouldnt even send 1 of the bad sets back to the owner after they did there testing,, the owner wanted to do some independent hardness testing so richmond just gave him his money back instead of sending him back the bad gears.
richmond gear wouldnt even send 1 of the bad sets back to the owner after they did there testing,, the owner wanted to do some independent hardness testing so richmond just gave him his money back instead of sending him back the bad gears.
#17
10 Second Club
iTrader: (4)
Join Date: Oct 2006
Location: wisconsin
Posts: 855
Likes: 0
Received 0 Likes
on
0 Posts
you never hear of a nickey camaro from way back they did conversions like yenko :
http://www.nickeychicago.net/
http://jannettyracing.com/
#18
On The Tree
iTrader: (2)
Join Date: Aug 2010
Location: Lafayette In.
Posts: 172
Likes: 0
Received 0 Likes
on
0 Posts
Here's another set. My Richmond 4.33's were installed by reputable shop (sponsor on here) on August 6th. I had the car out Friday evening and did a 1/2/3 blast down the road only to have this happen.....
The only mods my car has are a Roto-fab cold air, and Kooks LT's (stock tune).
The only mods my car has are a Roto-fab cold air, and Kooks LT's (stock tune).
#20
10 Second Club
iTrader: (4)
Join Date: Oct 2006
Location: wisconsin
Posts: 855
Likes: 0
Received 0 Likes
on
0 Posts
looks the same as the others that have broken, richmond has some issuse going on here. really sucks that no other gear companies have stepped up to make camaro gears, and richmond knows this and are selling them for a premium price,, over double what any other ring and pinions sell for,, at least with all the profit they are making on these gears they should have no problem covering warranty on them(you would think)