PhastekPerformance

Here is a ACS T3 port install brought to you by Phastek Performance. Picture intensive so be forewarned .

Start off by masking the area off that we are going to cut:



Just making sure the masked off area is correct so we don't damage the painted parts:


Remove the front bumper:




Sorry no pictures of us cutting the actual ports but cut them out following the lines we drew with our master template and you get this:



Next we test fit the ports:



Ports then sent out to get color matched to the car and we glue them in overnight:





Cured overnight and remove all the tape and we get our finished product:








Nice fresh air for the turbo to breathe in and a purdee bumper to boot