Wheels and tires for drag strip
#1
Registered User
Thread Starter
Join Date: Oct 2014
Location: Fairfield New Jersey
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Wheels and tires for drag strip
2011 Camaro SS lowered.
Im looking for tires and rims for when I go to the track only.
I currently run P Zero 20 inch for the street but am looking for a wheel and tire setup that I can drive to the track. I want to change the tires and then drive to the track and remove when I get home later.
Does anyone know which rim will fit if I go to an 18 and which tire is best.
I was looking at MT's but not sure. Im more concerned about the rim fitting over the Brembo in the back.
Thanks
Im looking for tires and rims for when I go to the track only.
I currently run P Zero 20 inch for the street but am looking for a wheel and tire setup that I can drive to the track. I want to change the tires and then drive to the track and remove when I get home later.
Does anyone know which rim will fit if I go to an 18 and which tire is best.
I was looking at MT's but not sure. Im more concerned about the rim fitting over the Brembo in the back.
Thanks
#2
11 Second Club
iTrader: (1)
Join Date: Jan 2007
Location: Moncton,N-B, Canada
Posts: 242
Likes: 0
Received 0 Likes
on
0 Posts
I run 17" Welds RT-S series on mine. clears the Brembo's. Just need to zip tie your hand brake cable's to gain extra clearance.And check the clearance between the wheel and the lower arms.With a fast 60 ft,the wheel may hit the arm.
You can go with 18"s aswell.
You can go with 18"s aswell.
#3
LS1Tech Co-Founder
iTrader: (34)
Race Star 18x10.5, polished or dark
Corvette C6 replica 18x9.5 40mm offset
Both are a direct fit.
18x9.5 ZR1 replica on my car:
Race Star 18x10.5 rear, 17x7 front, pic from web (TPower's car):
Corvette C6 replica 18x9.5 40mm offset
Both are a direct fit.
18x9.5 ZR1 replica on my car:
Race Star 18x10.5 rear, 17x7 front, pic from web (TPower's car):
#4
Registered User
Thread Starter
Join Date: Oct 2014
Location: Fairfield New Jersey
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
@Pro stock John,
Thanks alot this really helped, wasn't getting many responses. Spoke to Race Star and they have exactly what I want.
Thaks again
Thanks alot this really helped, wasn't getting many responses. Spoke to Race Star and they have exactly what I want.
Thaks again
Trending Topics
#8
10 Second Club
iTrader: (14)
Join Date: Dec 2005
Location: Central California
Posts: 1,392
Likes: 0
Received 0 Likes
on
0 Posts
Will any corvette replica wheel work for the rears of a ZL1? I was looking at these:
http://www.oewheelsllc.com/Wheels_3/...2#.VMEuH0fF9AI
not sure if i need 9.5" or 10.5"
http://www.oewheelsllc.com/Wheels_3/...2#.VMEuH0fF9AI
not sure if i need 9.5" or 10.5"
Last edited by RooRnZ28; 01-22-2015 at 11:13 AM.
#9
LS1Tech Co-Founder
iTrader: (34)
I created a sticky about drag wheels, still adding to it:
http://www.camaro5.com/forums/showth...68#post8186368
http://www.camaro5.com/forums/showth...68#post8186368