Wheels and tires for drag strip 2011 Camaro SS lowered. Im looking for tires and rims for when I go to the track only. I currently run P Zero 20 inch for the street but am looking for a wheel and tire setup that I can drive to the track. I want to change the tires and then drive to the track and remove when I get home later. Does anyone know which rim will fit if I go to an 18 and which tire is best. I was looking at MT's but not sure. Im more concerned about the rim fitting over the Brembo in the back. Thanks |
I run 17" Welds RT-S series on mine. clears the Brembo's. Just need to zip tie your hand brake cable's to gain extra clearance.And check the clearance between the wheel and the lower arms.With a fast 60 ft,the wheel may hit the arm. You can go with 18"s aswell. |
Race Star 18x10.5, polished or dark Corvette C6 replica 18x9.5 40mm offset Both are a direct fit. 18x9.5 ZR1 replica on my car: https://cimg6.ibsrv.net/gimg/ls1tech...507ad61cc4.jpg Race Star 18x10.5 rear, 17x7 front, pic from web (TPower's car): https://cimg5.ibsrv.net/gimg/ls1tech...430aa73fad.jpg https://cimg7.ibsrv.net/gimg/ls1tech...d52bf950c3.jpg |
@Pro stock John, Thanks alot this really helped, wasn't getting many responses. Spoke to Race Star and they have exactly what I want. Thaks again |
coo, i'm a dealer for them too. |
@prostock john John, what tires are you running on your star racing rims. I got the 18x10.5. I'm looking at Mt p305/35r18's |
For the rear I am running 305/45R18 Nitto NT05R. The 35's you are talking about sound kinda short no? |
Will any corvette replica wheel work for the rears of a ZL1? I was looking at these: http://www.oewheelsllc.com/Wheels_3/...2#.VMEuH0fF9AI not sure if i need 9.5" or 10.5" |
I created a sticky about drag wheels, still adding to it: http://www.camaro5.com/forums/showth...68#post8186368 |
Thanks for the link. Looks like the ones i posted wont fit due to the 56mm offset. Too bad cause they were on sale... |
56mm will require at least a 5mm spacer. |
305/45R18 Nitto NT05R. For my rear . |
is it possible to fit a 15" on the rear of a 5th gen? whats it take to do it? car in question is a 2010 ss L99auto |
All times are GMT -5. The time now is 11:27 AM. |
© 2024 MH Sub I, LLC dba Internet Brands