Finding a Roller
#1
Launching!
Thread Starter
Finding a Roller
I am looking for a good quality roller to start my first LS Swap project. Right now I have my eyes on a 71 Camaro which is located in Austin. This roller already had a T400 in it just no engine. I think I would like to have a lsX motor mated to a T56 or some other manual transmission. Since this car had an automatic transmission, would it be a bad candidate to switch over to a manual?
I have been looking on eBay and Craigslist, but not sure what all keywords I should be using to search for these cars. Does anyone have any tips for me on finding a good roller for a first LS Swap?
I have been looking on eBay and Craigslist, but not sure what all keywords I should be using to search for these cars. Does anyone have any tips for me on finding a good roller for a first LS Swap?
Last edited by Mike Blanco; 07-05-2014 at 05:16 PM.
#2
TECH Regular
iTrader: (1)
Join Date: Jun 2011
Location: Lansing, Michigan
Posts: 428
Likes: 0
Received 0 Likes
on
0 Posts
classifieds here, depends on your location too. i typically keep an eye on craigslist and sometimes i see a decent candidate that's reasonably priced. also depends on how much fabricating you want to do.