Misfire Help!
#1
Teching In
Thread Starter
Join Date: Dec 2010
Location: Melbourne Australia
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Misfire Help!
Hi All,
2009 Holden Caprice L76 engine
Put new cam, lifters, timing chain, oil pump head gaskets springs etc etc
Done a dod delete, so custom cam etc.
Car drives and pulls like a train, but has misfires across mainly the oz drivers side bank
What I have done so far:
Checked and rechecked earths all ok.
Brand new plugs and leads
New CAS, Cam Sensor
Changed fuel rails over
checked over wiring all in place
rechecked all rocker gear twice to make sure
Changed over coils banks
What I haven't done is put in new 02 Sensors - pre cat. After I have done this I am out of ideas.
Anything I have missed?
2009 Holden Caprice L76 engine
Put new cam, lifters, timing chain, oil pump head gaskets springs etc etc
Done a dod delete, so custom cam etc.
Car drives and pulls like a train, but has misfires across mainly the oz drivers side bank
What I have done so far:
Checked and rechecked earths all ok.
Brand new plugs and leads
New CAS, Cam Sensor
Changed fuel rails over
checked over wiring all in place
rechecked all rocker gear twice to make sure
Changed over coils banks
What I haven't done is put in new 02 Sensors - pre cat. After I have done this I am out of ideas.
Anything I have missed?