General Maintenance & Repairs Leaks | Squeaks | Clunks | Rattles | Grinds

Grinding noise when trying to start...flywheel?

Thread Tools
 
Search this Thread
 
Old 10-25-2011, 08:45 PM
  #1  
Teching In
Thread Starter
 
TONY206's Avatar
 
Join Date: Oct 2008
Location: Seattle
Posts: 32
Likes: 0
Received 0 Likes on 0 Posts

Default Grinding noise when trying to start...flywheel?

Last week I was driving home in 2002 WS6 with 113k miles and heard what I thought to be an exhaust leak out of nowhere. I revved the engine and it got louder but at idle seemed to disappear. I have a cutout so that may have covered it up. I just got two new cats so I thought maybe the bolts were loose.

I parked it and let it sit and the next day I get underneath to check the cats and everything seemed fine. So I try to start it and hear this really loud grinding noise and the engine doesn't even try to turn over. I do some searching online and read it could be the starter, bad ground, or battery not putting out enough amps.

I get a brand new (not reman) starter today and hear the same noise. Check the ground and wires and everything seems ok. I take the <2 year old battery to Autozone and they say it's fine. I then check the inspection cover and look at the flexplate and notice a small crack.


Last edited by TONY206; 10-25-2011 at 09:52 PM. Reason: flexplate not flywheel
Old 10-25-2011, 08:59 PM
  #2  
Teching In
Thread Starter
 
TONY206's Avatar
 
Join Date: Oct 2008
Location: Seattle
Posts: 32
Likes: 0
Received 0 Likes on 0 Posts

Default

Automatic btw.
Old 10-25-2011, 09:53 PM
  #3  
Teching In
Thread Starter
 
TONY206's Avatar
 
Join Date: Oct 2008
Location: Seattle
Posts: 32
Likes: 0
Received 0 Likes on 0 Posts

Default

Well, found a video and this sound could very well be it.

http://www.youtube.com/watch?v=wtK_I...layer_embedded
Old 10-26-2011, 01:50 PM
  #4  
Staging Lane
iTrader: (14)
 
macknmikey's Avatar
 
Join Date: Nov 2004
Posts: 62
Likes: 0
Received 0 Likes on 0 Posts

Default

torque converter bolts tight?

nvm didnt read your full post just looked at the video..
Old 11-11-2011, 10:31 AM
  #5  
Teching In
Thread Starter
 
TONY206's Avatar
 
Join Date: Oct 2008
Location: Seattle
Posts: 32
Likes: 0
Received 0 Likes on 0 Posts

Default




Quick Reply: Grinding noise when trying to start...flywheel?



All times are GMT -5. The time now is 07:57 PM.