LS1TECH - Camaro and Firebird Forum Discussion

LS1TECH - Camaro and Firebird Forum Discussion (https://ls1tech.com/forums/)
-   General Maintenance & Repairs (https://ls1tech.com/forums/general-maintenance-repairs-102/)
-   -   clutch pedal start safety switch? (https://ls1tech.com/forums/general-maintenance-repairs/1654026-clutch-pedal-start-safety-switch.html)

stroked383HSR 06-12-2013 04:23 PM

clutch pedal start safety switch?
 
whats the part called that when you push the clutch ...it allows you to start the car?

mine sticks also may be going bad....and Im able to start the car without pushing in the clutch.

I wanna fix that.


thanks

wssix99 06-12-2013 08:03 PM

Clutch pedal position switch. It's under the lower IP panel and contacts the panel. You might also be out of adjustment - although they do go bad.

If the switch is bad, you also shouldn't be able to use your cruise control.

stroked383HSR 06-12-2013 09:57 PM

hmm? My cruise control works fine. 9 times out of 10 I dont have to push the clutch in to start my car.

wssix99 06-13-2013 08:54 AM

When you have the cruise control on, will pressing the clutch cut it off? (It should.) My expectation would be that if the clutch pedal switch is giving you a signal that the pedal is depressed, (and allowing the engine start) then it should do the same and prevent the cruise control from kicking in when selected.

Was the car an M6 originally from the factory?

Maybe there is something odd like the clutch pedal switch being on the edge of adjustment and it needs a pressurized clutch to press the pedal against the switch? I remember when I put in my Tick MC, I had to adjust the switch for the new pedal position.

Homeless2bNY 06-13-2013 09:25 AM

Clutch start switch.

replace that and recheck.

stroked383HSR 06-16-2013 07:22 PM

just an FYI.....I replaced the switch $5.99 at AZ and all is good Im back in business and now have to push the clutch in to start as it should be.


wssix99: everything worked as far as what you said...only thing was it would sometimes let me start without having to push the clutch in..Cruise worked normally...everything worked normally except for the start issue.
factory M6


but im all good now


thanks for the help guys


All times are GMT -5. The time now is 10:58 AM.


© 2024 MH Sub I, LLC dba Internet Brands