Cruise control doesn't work.
 

After I had the clutch replaced my cruise control has stopped working. The fuse is good, any other ideas for me to check?

was the master cylinder and pedal touched? there is a trigger wire that will turn off the cruise control connected to the clutch pedal. you might try checking that.

I will check them out here soon. I saw a post about a year ago from another forum member saying they had the same problem after they installed there Tick MC.
Thanks!

when I get home I think I have a wiring schematic of the cruise control and I can send it to you if you wanted to test it with a multi-meter.

Replace clutch switch. They are iffy without being disturbed but disturb them as old as these cars are getting and it's almost instant death. If nothing else replacing it will save you from a no start condition in the future.

The clutch switch just needs to be adjusted to the new MC/pedal. The switch screws in to a plastic mount. Just turn it one way or another to adjust how far the switch sticks out and where it contacts the pedal.

Thank for the reply's. Once it stops raining here I will give it a look.

Do you still have this?
 

If you still have this could you please send it to me I would like to have this I am having a similar problem.

If you register on AutoZone's web site, they offer free schematics for our cars now, through their technical section.

Replaced my clutch a few weeks back, and this was my issue. Threw a CEL too. I'd guess that's the cause.

check third stoplight
 

When I bought my 94 TA the cruise did not work and I found out that the cruise circut runs through the third rear stoplight, the one in the spoiler. Sure enough that light was burned out I replaced it and the cruise came back to life...just saying.

This may sound unrelated like it did to me when I first read it, but using L.E.D. bulbs can also disable the cruise control. There are some threads on the subject.