1999 Z28 broke down and throttle does nothing.
03-20-2017, 09:50 PM
#1
1999 Z28 broke down and throttle does nothing. So my 1999 Z28 just broke down. When I press the throttle nothing happens. The car doesn't respond and I can't go anywhere almost like there's no throttle response. What should I look for, I already scanned it and got P0108. Possibly a map sensor? I'm not sure.
03-21-2017, 07:43 AM
#2
If it turns off every time, I'd wonder if your engine is flooding, but you should "feel" the engine complaining a bit. (I would think.)
Have you had someone look at the throttle body as you press the accelerator to make sure your linkage is fine? Maybe gas is going in, but the throttle plate isn't opening, letting in the air the engine needs?
Have you had someone look at the throttle body as you press the accelerator to make sure your linkage is fine? Maybe gas is going in, but the throttle plate isn't opening, letting in the air the engine needs?
03-21-2017, 11:15 AM
#6
It's not the throttle cable. I can get it to turn on and idle but when I push the throttle it doesn't always respond does sometimes and others it doesn't. If I open the throttle manually the engine bay the something happens.
As far as mods LS6 intake, headers, exhaust. I haven't done anything new to it in over a year.
As far as mods LS6 intake, headers, exhaust. I haven't done anything new to it in over a year.
Trending Topics
03-22-2017, 08:45 AM
#19
Launching!
While you have everything apart, take a close look at your fuel level sensor https://ls1tech.com/forums/showthrea...ferrerid=25107
.
.