98 WS6

iTrader: (20)

Sorry for all the threads, but the owner of that trans am i'm looking at just told me the only thing to report on the car.
Here's what he said:

"Recently there has been a slight squeek from the lower control arms. I think that's what it is anyway. They are perfectly fine though, I'am fairly certain the bushings just need to be lubed up. They have Urethane Bushings that supposidly squeek more than normal. I have only noticed it on the really hot days. I figure at the most it would be a couple hundred (worst case senario)"

You guys think they just need a lubing up?
Never really did any major suspension work when i had my 3rd gen, so I don't know about the bushings.

Thanks guys!

ae13291

iTrader: (8)

those after market lower control arm bushings should have grease fittings on them! u need to grease those!

98 WS6

iTrader: (20)

thanks again ae :] i only started this thread just to see if there are other possible reasons for them squeaking, more serious reasons. That way I don't get home with the car and next thing I know I have a $200 bill.

waiting2bl33d

i am in the process of changing my friends cause he didn't know that he had to grease them =(

billyb

iTrader: (15)

don't use dino grease, ot to be synthetic silicone based, clear in color spohn sellls it for 15.00a 14oz tube,i had squeaks and the grease cured it,http://www.spohn.net/?action=shop&pcid=1128 and i bought a new grease gun @ auto zone a pistol grip grease gun with a flexible hose works good.