FAST92/92..... what bellow to use?
 

i have a SLP Bellow, will it fit the Fast 92 with the NW Tb?
i know that you can put the bellow in near boiling water to try and expand it it, im just getting everything ready since i have alot of parts waiting to get put on my car.

thanks

EDIT: also in mid april i will have my stock LS6 manifold and ported throttle body for sale PM if you are willing to wait

row 3, middle 4"-3.5"

is another option.

i used my stock accordion thing...and stretched it.

the boiling water softens the material, doesn't expand it.

I'm curious as well. I'm going to be faced with the same problem as the OP.

the outside of my FAST 90mm thottle body is about 4.5"

if you think you can stretch it that much go for it. i know the stock bellows will, not sure if the SLP bellow will.

but for $25 you can get a new one from the link i posted.

thanx, thats for a stock maf?

yeah the 3.5" should fit the stock maf fine.

the inside is 75mm...which is 3", so the outside is damn close to 3.5"

I helped my friend put a fast92 with NW 92mm tb on his 99 ta and he has a slp intake kit and the bellows fit ..just a little snug though

It fit with my Fast 90/ NW 90 TB.....92/92 would probably need some good stretching.

thanx guys, ill try and post up some pix when i get to doing all this.