SiLVeR_PhoeNiX

my brother has a 99 rs and told me i could have the parts that follow. magnaflow 3" exhaust all the way down (just need to find headers), ss hood with ram air airbox and highflow filter, and he's throwing in his 1000 watt amp with 2 12' subs. i woulda been fine with a 10" with a stealth box cuz the trunk area help when i need my gear and such for work. subs freakin slapp hard too! i would just need to get the wiring and pay for labor.
so how much trouble would i encounter bolting on the full exhaust, hood and airbox from his 99 rs to my 98 z28?

bigairboarder44

iTrader: (2)

There was no RS in 99, but the exhaust would need to be modified to fit your headers because the V6 and V8s collect at different locations. The airbox wouldn't work because the throttle body on the V6 is about six inches to the passenger side I believe, but the hood would work.

SiLVeR_PhoeNiX

how much work world it take to mod it to my z? and what would i need it i wanted to do it myself. i guess i would have to cut then cuz its welded after the headers. not "TO" the headers, but after

SLP4CamaroSS

iTrader: (16)

if it a v6 the I pipe is different has and extra s on it. should be easy to cut off and put on a 3inch pipe inplace if it isnt long enough look at the magnaflow site

bww3588

iTrader: (49)

the lower air boxes are the same...i think thats all he is talking about.

SiLVeR_PhoeNiX

that was part of it. im also curious to know if i can mount his magnaflow exhaust onto my v8 (headers excluded, of course) and if so, how much trouble will i run into

SLP4CamaroSS

iTrader: (16)

i just told u what u had to do post 4. everything bolts up. at the beginning of the ipipe theres is a s shape pipe u have to cut of and possible put in another 3inch pipe in there for the difference

SiLVeR_PhoeNiX

i meant "i was" also curious to know. you laid it out quite clearly man, thanks