Meziere race pump ??
Thread Starter
9 Second Club
iTrader: (9)
Joined: Nov 2001
Posts: 570
Likes: 0
From: St. Charles, MO
Originally Posted by quickWS6
You can use the stock upper. The lower, I just used a 30" universal flex hose. I believe the diameter is 1.5".
Guess your running the power steering cooler? Went with a manual rack so I want to delete that cooler. The universal flex hose will it work for the top also and where did you get it and how much. thanks
Thread Starter
9 Second Club
iTrader: (9)
Joined: Nov 2001
Posts: 570
Likes: 0
From: St. Charles, MO
Originally Posted by JS
Call Jay Fisher Pontiac,He is working on a remote stat and what not for the heater IF u still wanna retain it?
TECH Addict
Joined: Dec 2001
Posts: 2,337
Likes: 0
From: Auburn, AL
Originally Posted by DOC OTIS
Guess your running the power steering cooler? Went with a manual rack so I want to delete that cooler. The universal flex hose will it work for the top also and where did you get it and how much. thanks
I just had a race pump and a motor plate installed. I run the Madman manual rack also. I sure would like to figure out the bottom hose situation also. Can anyone help with a part #? Can you use a flex hose for the top also? If so what would the part # be?
Thanks,
Coach
Thanks,
Coach
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
The problem that I am having on the top hose is, that it rest on the front of the pump. I just want a little more space so the heat from the hose stays away from the front of the pump.
How long is the universal flex hose?
Coach
How long is the universal flex hose?
Coach
BOY OH BOY Coach you will complain about anything. You must be hanging out with too many WRESTLERS!!!!!!
Thread Starter
9 Second Club
iTrader: (9)
Joined: Nov 2001
Posts: 570
Likes: 0
From: St. Charles, MO
Originally Posted by MADMAN
BOY OH BOY Coach you will complain about anything. You must be hanging out with too many WRESTLERS!!!!!!
j/kWhat's up Brian this is Brian from St. Louis
Car is almost done I'll send ya some pics when its done, think you'll like em 
I love you too. 
I took my stock lower hose to the auto parts store and they had mucho hoses hanging on the wall. I picked one from the wall that matched the stock profile pretty close, cut a bit of excess off the new one and vvwwaaala. A hose that works.
How do you plan on modifying the tensioner?
Tom
How do you plan on modifying the tensioner?
Tom
Originally Posted by Tom the roofer
I took my stock lower hose to the auto parts store and they had mucho hoses hanging on the wall. I picked one from the wall that matched the stock profile pretty close, cut a bit of excess off the new one and vvwwaaala. A hose that works.
How do you plan on modifying the tensioner?
Tom
How do you plan on modifying the tensioner?
Tom
No tensioner here. Madman did it with the alt. I now have a killer motor plate and only 1 belt from the balancer to the alt.
Coach
Originally Posted by Coach 02 A3 Z/28
No tensioner here. Madman did it with the alt. I now have a killer motor plate and only 1 belt from the balancer to the alt.
Coach
Coach
No adjusting required My belt goes around the balancer, alt. and tensioner. JMO Tom
Thread Starter
9 Second Club
iTrader: (9)
Joined: Nov 2001
Posts: 570
Likes: 0
From: St. Charles, MO
Tom
I am also running just an alternater. I was going to have Billingsly fab the alt bracket up for me. Is there an easier way to do this? How did you use a tensioner? Got any pics of your set-up?
I am also running just an alternater. I was going to have Billingsly fab the alt bracket up for me. Is there an easier way to do this? How did you use a tensioner? Got any pics of your set-up?
Originally Posted by DOC OTIS
Tom
I am also running just an alternater. I was going to have Billingsly fab the alt bracket up for me. Is there an easier way to do this? How did you use a tensioner? Got any pics of your set-up?
I am also running just an alternater. I was going to have Billingsly fab the alt bracket up for me. Is there an easier way to do this? How did you use a tensioner? Got any pics of your set-up?
Tom
Thread Starter
9 Second Club
iTrader: (9)
Joined: Nov 2001
Posts: 570
Likes: 0
From: St. Charles, MO
Originally Posted by Tom the roofer
It is easy, You can do it yourself. and Yes I do have pics. Give me a few to find them.
Tom
Tom