badazz81z28

iTrader: (6)

Looking to get the 85mm MAF from a Z06...

What years had them and will work on my LS1 harness? I saw a post that thought earlier years were 3 pin and later were 5 pin...

Any help! Please. Thanks,

badazz81z28

iTrader: (6)

Part # would be awesome!

slammedc5

iTrader: (1)

All 01 and up c5s have 85mm MAFs

badazz81z28

iTrader: (6)

Where they all 5 pin sensors?

badazz81z28

iTrader: (6)

Looks like I found what needs to be done in the harness....long shot...

Does someone know the part number for the Z06 5 pin connector to re-wire the harness?

slammedc5

iTrader: (1)

Here's a link to the c5 conversion, not sure about the fbody

http://www.ls1howto.com/index.php?article=25

99Bluz28

iTrader: (35)

currentperformance.com and Casper electronics both have the needed adapter.

Check RockAuto they have good prices on MAFS.

Pharcyde50

iTrader: (11)

should be able to find a 85mm unit on ebay for around $50, doesnt have to be a z06 any of the delphi 85mm units will work

badazz81z28

iTrader: (6)

Are they same? or just work? I don't want to run into any problems when Texas Speed tunes the PCM.

I looked on Ebay and didnt find any for that coin. I did find a bunch of "no name" brand remanufactured units. Whats the magic search words?

Pharcyde50

iTrader: (11)

Delphi 85mm maf, they should be easy to tune

http://shop.mobileweb.ebay.com/searc...mm+maf&x=0&y=0

badazz81z28

iTrader: (6)

Ok, Sounds good. I found the MAF...Now for a cleaner install, looking into a 5 pin Delphi connector rather than the harness. Found the connector...

Will/Does anyone know the pin #s/location?

jimmyblue

iTrader: (11)

It doesn't matter. All the 85mm Delphi MAFs are the same aside from
the "screen". I removed my screen and the Z06 tables are right on, at
least after the H/C/I swap; pre-swap the truck table (with the MAF
descreened) was a little tighter.

badazz81z28

iTrader: (6)

Here is a good chart for reference.

BTW does anyone know where to buy the connector #15305555 and pins without a 100 minimum purchase?

Pharcyde50

iTrader: (11)

How about just grab one out of a junk yard? Late model chevy and gmc trucks run them.