3" exhaust with UMI short TA, Who has pic of theirs?
#1
TECH Regular
Thread Starter
iTrader: (9)
Join Date: Sep 2010
Posts: 406
Likes: 0
Received 0 Likes
on
0 Posts
3" exhaust with UMI short TA, Who has pic of theirs?
I currently have 3" TSP Y pipe turned into an xpipe with bullets, I picked up a UMI short TA for a good price but when i went to put it on my Xpipe is directly where the mount mounts to the tunnel. What Is everybody running for exhaust, are you going around it xing around it and dumping before rear? I would love to see some pic of other people's setups. I want to keep my X pipe and my bullets but I would also like to finish my exhaust over axle to the rears. I was going to drop down to 2.5 before the axle.
#2
8 Second Club
iTrader: (16)
I currently have 3" TSP Y pipe turned into an xpipe with bullets, I picked up a UMI short TA for a good price but when i went to put it on my Xpipe is directly where the mount mounts to the tunnel. What Is everybody running for exhaust, are you going around it xing around it and dumping before rear? I would love to see some pic of other people's setups. I want to keep my X pipe and my bullets but I would also like to finish my exhaust over axle to the rears. I was going to drop down to 2.5 before the axle.
I used Kooks 1-7/8 LT headers to the Kooks 3" y-pipe... we made a custom 4" merge.... and went 4" back over the axle and out the rear..
sorry the are shitty cell phone pics... but its all I have of it.
#6
12 Second Club
Join Date: Dec 2008
Location: Richmond,VA
Posts: 319
Likes: 0
Received 0 Likes
on
0 Posts
it can be done, you will have to maybe change you x pipe. look at this guys setup
https://ls1tech.com/forums/generatio...m-3-duals.html
https://ls1tech.com/forums/generatio...m-3-duals.html
#7
TECH Regular
Thread Starter
iTrader: (9)
Join Date: Sep 2010
Posts: 406
Likes: 0
Received 0 Likes
on
0 Posts
it can be done, you will have to maybe change you x pipe. look at this guys setup
https://ls1tech.com/forums/generatio...m-3-duals.html
https://ls1tech.com/forums/generatio...m-3-duals.html
I guess I will have to wait till monday when I get home to see it again and figure out what I should do... IN the meantime MORE PICTURES please! thanks
Trending Topics
#8
8 Second Club
iTrader: (16)
you can modify your Y pipe to go upwards slightly, and then go over the Torque arm mount...
with my 4", all we had to do was crush a 4" pipe to mate up to the 3" Y pipe... then we just pointed it upwards ever so slightly and it went right over the torque arm mount bar with no issues.
you just have to be smart about which way you go with things and plan ahead...look at every option before you start to build it... and do a lot of test fitting and tack welding before you weld things up for a final time.
with my 4", all we had to do was crush a 4" pipe to mate up to the 3" Y pipe... then we just pointed it upwards ever so slightly and it went right over the torque arm mount bar with no issues.
you just have to be smart about which way you go with things and plan ahead...look at every option before you start to build it... and do a lot of test fitting and tack welding before you weld things up for a final time.
#10
8 Second Club
iTrader: (16)
you can always take a piece and take a notch out with a saw or make several small incisions along one side and flex it together to make a tighter or wider radius...
mig welding goes a long way
and if you need to "Crush" a section slightly... juse use a vice...
you will find that with a little planning and patience, you can figure out that you need 90's and 45's to get to what you want with minimal cutting and welding..
#12
TECH Regular
Thread Starter
iTrader: (9)
Join Date: Sep 2010
Posts: 406
Likes: 0
Received 0 Likes
on
0 Posts
I have access to a exhaust bender with 2.5" diesduel so when i do get it done im going 3"to to the axle then 2.5 over axle. I have a few left over bends from when i made the y into an x ill put up my photo bucket And post a pic of my y-x pipes when i get on my computer this evening.
#13
12 Second Club
Join Date: Dec 2008
Location: Richmond,VA
Posts: 319
Likes: 0
Received 0 Likes
on
0 Posts
Im planning on doing duals also but cant find anyone with a mandrel bender around here, im planning on using a universal magnaflow x pipe from summit to fit in between the body and tunnel brace mount, but it will be tight, then dumping before the rear axle. will probly have to end up getting a couple pre bent pipes and go from there. good luck
#14
TECH Regular
Thread Starter
iTrader: (9)
Join Date: Sep 2010
Posts: 406
Likes: 0
Received 0 Likes
on
0 Posts
Im planning on doing duals also but cant find anyone with a mandrel bender around here, im planning on using a universal magnaflow x pipe from summit to fit in between the body and tunnel brace mount, but it will be tight, then dumping before the rear axle. will probly have to end up getting a couple pre bent pipes and go from there. good luck
I was thinking about putting the x pipe after the tunnel brace.
If you do get the universal go to ebay and find the same one its the exact same one from magnaflow its a stamped xpipe but its 25ish compared to 50+
#15
12 Second Club
Join Date: Dec 2008
Location: Richmond,VA
Posts: 319
Likes: 0
Received 0 Likes
on
0 Posts
yea il look into that thanks, only real reason i was going to run it under tunnel brace is for the fitment of the mufflers which i dont even know what il get yet, thinking of the sweet thunder ones, seems popular with true duals
#17
11 Second Club
iTrader: (11)
Join Date: Aug 2005
Location: St. Petersburg, FL
Posts: 574
Likes: 0
Received 0 Likes
on
0 Posts
I built my 3" x pipe setup through the UMI short torque arm. I bought a bunch of 3" mandrel bends and welded it all up with a Jegs universal x pipe kit. After the X it goes straight back with 2 moroso spiral flows welded together and both pipes dump right after the rear passenger side tire. Car sounds sick!
Took a lot of work to position the x pipe in the correct spot and space is limited for the mufflers I had to do the BFH mod to the passenger foot well.
Took a lot of work to position the x pipe in the correct spot and space is limited for the mufflers I had to do the BFH mod to the passenger foot well.
#18
TECH Regular
Thread Starter
iTrader: (9)
Join Date: Sep 2010
Posts: 406
Likes: 0
Received 0 Likes
on
0 Posts
I built my 3" x pipe setup through the UMI short torque arm. I bought a bunch of 3" mandrel bends and welded it all up with a Jegs universal x pipe kit. After the X it goes straight back with 2 moroso spiral flows welded together and both pipes dump right after the rear passenger side tire. Car sounds sick!
Took a lot of work to position the x pipe in the correct spot and space is limited for the mufflers I had to do the BFH mod to the passenger foot well.
Took a lot of work to position the x pipe in the correct spot and space is limited for the mufflers I had to do the BFH mod to the passenger foot well.