Chevyalltheway!

I have an 04 6.0 I have rebuilt. I put a ZO6 cam in with the 243 heads and bolted an ls6 intake on top. I have stock ls1 injectors right now, but I have been told they won't work. What injector should I go with? This beast will be dropped in a 94 Chevy c1500 2wd single cab. Any help would be appreciated

waybad

iTrader: (4)

depends how hard you are going to rev it? I have a set of 42lbs for 250.00 shipped if you want them? I have 36 in my car with a bigger cam than you but mine is a 346

Chevyalltheway!

Thanks I have some 42lb injectors just wasn't sure. Would I be able to have evap deleted n run a hose from driver valve cover to intake evap line?

rpturbo

iTrader: (47)

Yep, those 42# injectors are a good choice. I run the stock GM 3800 supercharged injectors because they are a direct bolt in, and super cheap.

Chevyalltheway!

Rite on so its all good to run a hose from intake to valve cover on ls6 intake?

Chevyalltheway!

What kind of fuel pump is needed for this swap in my truck?

axe murderer

iTrader: (3)

Stock is fine
https://ls1tech.com/forums/fueling-i...ctor-size.html
https://ls1tech.com/forums/fueling-i...ctor-size.html