single exit muffler
#22
Don't know how much, but I'm sure its a fairly rare piece to be found by someone looking to restore their 98 Camaro SS / Z28.
Here's a picture of my 98 SS that I sold last Sept. It sadly has fallen into the hands of a dealer who messed it up... :-(
I bet you could get $500 or more for the SOTL Exhaust, maybe much more.
#23
I’m not certain of the value, but I’ve often thought about finding a complete SOTL muffler with intermediate pipe that I could bolt on to my ‘99 WS6 and compare the two exhaust systems on the dyno.
Is yours complete? And how could you ship it?
Is yours complete? And how could you ship it?
#24
TECH Resident
iTrader: (2)
Join Date: Jan 2003
Location: MD
Posts: 994
Likes: 0
Received 0 Likes
on
0 Posts
I'm located in MD, not sure where you are.
I have the intermediate pipe, and the muffler.
It's been a long time since I looked at it, but I think I made one cut where it goes over the axle to remove it. It matches right back up, and could easily be welded back together.
All hangers and brackets are in place, and the polished tip is nice.
Shipping would be a killer.
I have the intermediate pipe, and the muffler.
It's been a long time since I looked at it, but I think I made one cut where it goes over the axle to remove it. It matches right back up, and could easily be welded back together.
All hangers and brackets are in place, and the polished tip is nice.
Shipping would be a killer.
#25
11 Second Club
iTrader: (43)
I know this is an older thread.
I did this to my old 2000 SS back in 2007...(still have the same old tennis shoes as in the video, LOL)
Used a Dynomax over axle pipe, a generic muffle, a 90 out of it, and a 45 turndown.
I thought it sounded great, and had no rasp, quiet at cruise, loud at WOT...everything I wanted...
I'd do the same to my current car, a T/A, but I think it would look silly since this car has dual openings/cutouts for the exhaust.
My Trans Am HAD a 4" single outlet, but the muffler was a 76mm turbo, lol...(still looked odd only on one side though)
I did this to my old 2000 SS back in 2007...(still have the same old tennis shoes as in the video, LOL)
Used a Dynomax over axle pipe, a generic muffle, a 90 out of it, and a 45 turndown.
I thought it sounded great, and had no rasp, quiet at cruise, loud at WOT...everything I wanted...
I'd do the same to my current car, a T/A, but I think it would look silly since this car has dual openings/cutouts for the exhaust.
My Trans Am HAD a 4" single outlet, but the muffler was a 76mm turbo, lol...(still looked odd only on one side though)
#26
TECH Junkie
iTrader: (6)
It’s exactly the orientation v6 fbody cars had.
After dealing with poorly made duals on low car and being hassled by the fuzz , I decided to get the dynomax 3” pipes off amazon and throw on a single 3” in/out magnaflow muffler on it. Clean simple with nice idle and WOT combo.