Who makes an ORY that will bolt up to stock manifolds?
07-29-2004, 03:38 PM
#1
Teching In
Thread Starter
Join Date: Dec 2001
Location: Sterling heights, MI
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
Who makes an ORY that will bolt up to stock manifolds? Lets just say that my experience with MAC performance has been less than satisfactory, so I'm looking for other options.
07-29-2004, 04:45 PM
#6
Teching In
Thread Starter
Join Date: Dec 2001
Location: Sterling heights, MI
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by DisturbedOne
Lets just say that my experience with MAC performance has been less than satisfactory, so I'm looking for other options.
Trending Topics
there are some good exhaust shops here in michigan that you can get mandral bent tubing made for reasonable prices.
07-30-2004, 11:24 AM
#9
12 Second Club
iTrader: (2)
Join Date: Nov 2001
Location: Baton Rouge, LA
Posts: 291
Likes: 0
Received 0 Likes
on
0 Posts
http://www.thunderracing.com/catalog...vid=3&pcid=228
Those will bolt in place of the stock cats. They would work with the stock y-pipe or aftermarket y-pipes that are meant as direct replacements of the stock y-pipe (i.e.-not y-pipes made for headers).
Those will bolt in place of the stock cats. They would work with the stock y-pipe or aftermarket y-pipes that are meant as direct replacements of the stock y-pipe (i.e.-not y-pipes made for headers).
07-31-2004, 01:26 AM
#11
Originally Posted by Hammer231
Is there much of a hp advantage to going with a ORY and keeping the stock headers or does it just sound better?
