Kook Headers are installed
Originally Posted by camaro99z
There are no provisions for the rear O2's on the y-pipe. Just get some O2 sims or have the sensors deleted with LS1 edit.
What kind of cats are they?
Thread Starter
On The Tree
Joined: May 2004
Posts: 191
Likes: 0
From: PA
I stooped by the shop today and asked the owner how they bolted on. He told me that the meachanic that did my headers did 4 LS1s before. It took him 8 hrs and the headers fit better then the other ones that he did but still he had some problems. Also I recieved in one post that I should change the maf air flow. Where do I buy the device to do it and is it hard to do by yourself?
Why would you need to mess with the MAF? I know LT's make the car rich, is that what is messed with when you get a "tune"?
http://www.ramchargers.com/cgi-bin/n...890&cat2=26891
oh BTW thanks for checking about the fitment, I guess its dif. for all cars....
http://www.ramchargers.com/cgi-bin/n...890&cat2=26891
oh BTW thanks for checking about the fitment, I guess its dif. for all cars....
Thread Starter
On The Tree
Joined: May 2004
Posts: 191
Likes: 0
From: PA
Thanks for the link. The car ran a little rich before I added the headers but now I can smell the fumes really bad when I'm behind the exhaust. I'm not sure about the tune thing either. I either need to cut some of the gas flow or add more air I guess.
Thread Starter
On The Tree
Joined: May 2004
Posts: 191
Likes: 0
From: PA
Today I when I started the car the SES light came on. Would it be from an O2 sensor and would that be the cause of my mpg decreasing? Th car seems to run the the as when the headers were installed.
Originally Posted by Toadman
Today I when I started the car the SES light came on. Would it be from an O2 sensor and would that be the cause of my mpg decreasing? Th car seems to run the the as when the headers were installed.
If you can smell the fumes, it is probably a rich code. Everyone, how does the MAFT translator work? do you plug it in and forget about it? or do you plug in and adjust?
Why do the cars run richer with LT's? Is it because of the scavenging of the cylinder?
Originally Posted by psykoTa
Everyone, how does the MAFT translator work? do you plug it in and forget about it? or do you plug in and adjust?
Originally Posted by LS1LT1
There are adjustments to be made and it can help but it's still best to just skip the MAFT and put that cash towards a real dyno tune/LS1 Edit.
When getting the car tuned, is it difficult to get the A/F ratio back to 14.7:1?
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
Originally Posted by psykoTa
When getting the car tuned, is it difficult to get the A/F ratio back to 14.7:1?
Originally Posted by LS1LT1
It can be dependent on some of the components/parts/mods chosen but in most cases no, it's not too difficult as long as the tuner knows what they're doing.
Ok thanks. Well your in NJ, anyone you would recommend?
Originally Posted by psykoTa
Ok thanks. Well your in NJ, anyone you would recommend?
Originally Posted by LS1LT1
Yes, Cartek in Garwood, NJ ( www.cartek.net ) but that's a bit of a hike for you, worth the trip though.
Cool, thanks. Finally someone can recommend a place!! How about getting some SFC's welded in?
Originally Posted by psykoTa
Cool, thanks. Finally someone can recommend a place!! How about getting some SFC's welded in?
Originally Posted by psykoTa
When getting the car tuned, is it difficult to get the A/F ratio back to 14.7:1?
The car wont deviate from 14.7 while in closed loop. The smell is prolly because of no cats and running a little richer (switching to maintain 14.7) A quick tune will help this rich condition and really is nothing to worry about
Thread Starter
On The Tree
Joined: May 2004
Posts: 191
Likes: 0
From: PA
Theres no actual dyno tuning places that I know of in the area. The shop where I got the headers on at said about using the predator or hypertech tuner. I am not sure if they know how to use LS1 edit. Which is the best tuner to use without dynoing the car and easy to understand?
Originally Posted by Toadman
Theres no actual dyno tuning places that I know of in the area. The shop where I got the headers on at said about using the predator or hypertech tuner. I am not sure if they know how to use LS1 edit. Which is the best tuner to use without dynoing the car and easy to understand?
There is also the Superchips Microtuner, Crane and Vinci models as well.
Originally Posted by Toadman
Theres no actual dyno tuning places that I know of in the area. The shop where I got the headers on at said about using the predator or hypertech tuner. I am not sure if they know how to use LS1 edit. Which is the best tuner to use without dynoing the car and easy to understand?
