LS1TECH - Camaro and Firebird Forum Discussion

LS1TECH - Camaro and Firebird Forum Discussion (https://ls1tech.com/forums/)

- Generation III External Engine (https://ls1tech.com/forums/generation-iii-external-engine-6/)

- - Question on TB's (https://ls1tech.com/forums/generation-iii-external-engine/289807-question-tbs.html)

Ru2n00n3er

Mar 14, 2005 06:57 AM

Question on TB's

Thinking of picking up a used TB that was used on a 02 car. Will this work with a 00? The only difference I know of in TB's is the shaft, but I don't really know what years were different and how so. What is involved with swapping throttlebodies and how hard is it? Thanks.

denton needham

Mar 14, 2005 07:05 AM

I just did that. Not hard but you have to have a torx driver to take out the throttle blades. these screw are really tight. once the blades are out tap out and swap. might want to run some light sandpaper over the shaft if it is sticky and hard to go back in

TNC_LS1

Mar 14, 2005 07:05 AM

HERE YA GO MAN

http://www.ls1howto.com/index.php?article=11

Ru2n00n3er

Mar 14, 2005 11:29 AM

Anyone know if an 02 TB will work on a 00?

cyphur

Mar 14, 2005 11:31 AM

98-99 have interchangable throttle cams, 00-02 have interchangable throttle cams. all throttle body housings are identical. 02 should work just fine on your 2k SS. go for it!!

Ru2n00n3er

Mar 14, 2005 11:53 AM

Okay, that's what I thought, thanks.

All times are GMT -5. The time now is 05:08 PM.