SouthFL.02.SS

Different TB's for different years on stockers. Does this apply for the BBK?

blkhurstz28

...o crap...hope not

Tom the roofer

iTrader: (9)

What is the difference between the years?

SouthFL.02.SS

Throttle cam is different for '98 / '99 vs. '00 - '02

Tom the roofer

iTrader: (9)

Didn't know that. I don't know if that is the same for the BBK.

Tom the roofer

iTrader: (9)

BBK doesn't appear to specify years. Check out the link below.

http://fasttoys.net/shop/product_inf...roducts_id=135

Tom the roofer

iTrader: (9)

Here is another link. It seems your good to go.

http://www.texas-speed.com/item_detail.asp?ProductID=79

SouthFL.02.SS

Yeah, they're sold as is. No years specified. Is it adjustable?

Tom the roofer

iTrader: (9)

Doesn't appear to be. Does it need to be?

Tom the roofer

iTrader: (9)

The second link specifies 1998-2002 LS1 F-Body

Tom the roofer

iTrader: (9)

His problem is the trottle pedal is depressed 3 inches. Why? Seems to me his throttle cable is not hooked up properly. Did the cable become disconnected from the pedal? Did the cable become kinked during installation? This is a very odd problem.

SouthFL.02.SS

I'd think that the throttle cable needs adjusting in length, due to the different ramp profile of the TB cams of differing years. That's all I'm gonna say. Good luck to both of ya!

Tom the roofer

iTrader: (9)

Thanks for your help. I would call BBK if I were you and find out. Here is their contact info.
http://www.bbkperformance.com/contact.shtml

blkhurstz28

ok thanks..sry i wasnt paying attention..

blkhurstz28

I called BBK, and they told me that to fit I needed a spacer plate and a cable adjustment. Do you think you still have those parts? The whole thing came in a kit and im pretty sure that is my problem.

Tom the roofer

iTrader: (9)

No I don't. I didn't need a spacer plate. I bought the TB from a shopwhen they installed my engine they installed the TB. I never seen the kit myself. How much is the spacer plate and the cable adjustment from BBK?

blkhurstz28

they said that they dont sell the plate and adjustment separately, only with the kit

Tom the roofer

iTrader: (9)

Bummer. We will work this out. I'm not going to stick you with a TB that you can't use. Try and muster the parts up in the parts wanted section. If you don't have any luck within a week just send the TB back to me and I'll refund your money. OK?

blkhurstz28

sounds good,
thanks for the support and responses,
https://ls1tech.com/forums/parts-wanted/323150-bbk-80mm-tb-spacer-cable.html
thats the link to the WTB thread

Tom the roofer

iTrader: (9)

No problem, I am trying too. In the sponsor section.

https://ls1tech.com/forums/showthrea...67#post2926867