Least Expensive ORY? (Pacesetter LT's) I'm sure this topic has been run into the ground but I really couldn't find any specific posts for the least expensive ORY that will fit a set of Pacesetter LT's. I am on a tight budget for sure and need a good y-pipe but can't afford too much because every dollar counts. I will most likely have to get it welded on anyway because I have a custom 3" exhaust on the car already. Any suggestions on what I should do? I would do true duals but I need it to exit all the way out the back and I do really like the sound of the Hooker on there right now. I guess the fitment of the y-pipe won't be too big of a problem because an exhaust shop will have to weld it on there anyway. What do you guys think? |
Hooker ORY. By far fits the headers the best and does not bang the drivers side floorboard at all :) Night and day. I had the pacehitter Y pipe. |
dont get the tsp y it is a piece of crap. i promise if you get it you will be so pissed when you try to put it on |
Originally Posted by skywalkrNCSU dont get the tsp y it is a piece of crap. i promise if you get it you will be so pissed when you try to put it on X2 EDIT: I was sent the wrong pipe, so ill let you know when i get the right pipe how it goes in! |
I love the TSP, yeah it was a pain in the ass thats for sure. But you cant beat the price, plus its pretty adjustable. |
Originally Posted by JMBLOWNWS6 Hooker ORY. By far fits the headers the best and does not bang the drivers side floorboard at all :) Night and day. I had the pacehitter Y pipe. |
My Pacesetter Y fits perfect for the 119.00 I paid and I used the mufflex bump stop bracket around the Y. The only place I have some touching now is in the rear section of the GMMG exhaust and the heat shield. |
TSP is pretty cheap, I don't like the merge though. Lot of sharp edge protruding into the Y and looks like it's prone to encourage reversion rather than exit. I've been grinding on the inside to clean it up, probably got an hour into it with 1-2 more to go using a caride ball burr and a flex shaft. Figure I will also be doing a little sledgehammer clearancing when we get to actually fitting up the Y. Somebody needs to sell me a used Jet-Hot Y with blown cats. :) |
| All times are GMT -5. The time now is 06:08 PM. |
© 2026 MH Sub I, LLC dba Internet Brands