Huge News QTP Merge Collector Headers $724.99!!!
#1
Huge News QTP Merge Collector Headers $724.99!!!
Here is the big announcement.
For the past 6 months we have been working on getting our merge collectors down in price. They were outsourced and built by hand. Well we figured out a way to mass produce them and still have the same hand built quailty. So all our headers now will be produced with the High Velocity Merge Collectors(HVMC) at the standard collector price
200198- 1 3/4" 1998-2002 Camaro/Firebird LS1 High Velocity Race Header $724.99
Add $75.00 for emissions fittings
1998-1999-Air/EGR
2000-Air/EGR
2001-2002-Air
Also the headers are now fulley polished and with beatiful tig welds. We really went the extra mile on these.
Now we only did these to the 1 3/4" ones and didnt do them to the 1 7/8 since they were only 5% of the headers sales. But since there has been a demand on them we will produce the 1 7/8 HVMC but will be a little ways away on that. WIll announce when those are done.
We have a good stock on the headers, just doing the air/egr fitting on them now. So headers can go out this week. Y pipes we are building but have off roads on the shelf.
Lots of upcoming products from us this year ahead. A small teaser list.
Variable Valved Electric Muffler
LS2 Two Piece Timing Cover
C6 Tri Y Headers
Evolution 8 Cutout Down Pipe
Electric Muffler Exhaust System for the Gen III Trucks, C6 and others.
We will be closed the week of the 26th. So if anyone has any questions please call us before friday or after the 1st of the year.
For the past 6 months we have been working on getting our merge collectors down in price. They were outsourced and built by hand. Well we figured out a way to mass produce them and still have the same hand built quailty. So all our headers now will be produced with the High Velocity Merge Collectors(HVMC) at the standard collector price
200198- 1 3/4" 1998-2002 Camaro/Firebird LS1 High Velocity Race Header $724.99
Add $75.00 for emissions fittings
1998-1999-Air/EGR
2000-Air/EGR
2001-2002-Air
Also the headers are now fulley polished and with beatiful tig welds. We really went the extra mile on these.
Now we only did these to the 1 3/4" ones and didnt do them to the 1 7/8 since they were only 5% of the headers sales. But since there has been a demand on them we will produce the 1 7/8 HVMC but will be a little ways away on that. WIll announce when those are done.
We have a good stock on the headers, just doing the air/egr fitting on them now. So headers can go out this week. Y pipes we are building but have off roads on the shelf.
Lots of upcoming products from us this year ahead. A small teaser list.
Variable Valved Electric Muffler
LS2 Two Piece Timing Cover
C6 Tri Y Headers
Evolution 8 Cutout Down Pipe
Electric Muffler Exhaust System for the Gen III Trucks, C6 and others.
We will be closed the week of the 26th. So if anyone has any questions please call us before friday or after the 1st of the year.
Last edited by Quick Time; 12-21-2005 at 07:58 AM.
#4
Kleeborp the Moderator™
iTrader: (11)
I wish you guys would have had this deal when I was first buying headers...might not have gone with Kooks
Oh well...now that I have the Kooks and a custom exhaust that was fabbed to specifically fit those headers, I guess I'm too far in to the game to be switching things up
Oh well...now that I have the Kooks and a custom exhaust that was fabbed to specifically fit those headers, I guess I'm too far in to the game to be switching things up
#5
!LS1 11 Second Club
Cheap LS6 heads (by other sponsors), now cheap HVMC's! DAMN!
Coming from someone who has felt what a set of HVMC's can do (increased low and mid range response, along with awesome peak numbers), this is AWESOME news.
Coming from someone who has felt what a set of HVMC's can do (increased low and mid range response, along with awesome peak numbers), this is AWESOME news.
Trending Topics
#13
TECH Regular
Join Date: Dec 2005
Location: Down Under
Posts: 400
Likes: 0
Received 0 Likes
on
0 Posts
Ok.. deals like this should be outlawed because people who spent an arm and a leg for headers deserve these!!
oh well.. looks like the headers i just bought will have to do... even if they cost more..
oh well.. looks like the headers i just bought will have to do... even if they cost more..
#16
hey the headers you shipped me are they the hvmc? they look likeit that would be awesome. i was also thinking mine looked polished , did you do all this to my set i just got?