Runing Rough
Thread Starter
Teching In
Joined: Mar 2002
Posts: 47
Likes: 0
From: Miami, Florida
Runing Rough Guys I need your tech expertise on this matter before I spend any more time or money on it.
I changed the plugs on my car and ever since, it runs rough right around 1000 RPM, but not at any other RPM that I have noticed.
I installed NGK-Tr55 gapped at 0.60 and I used some antisize on the threads before installing. I also put in new MSD wires. Now the car runs fine and starts up with no porblems. But right around 1000 RPM is runs rough.
What could it be, what should I look for, ...?
Could it be that the gap is too much, cause my old ones were set at 0.58?
Could it be that I used too much antisize and that is messing something up?
Could it be the wires not connected properly?
Any help is appreciated! Thanks people!
I changed the plugs on my car and ever since, it runs rough right around 1000 RPM, but not at any other RPM that I have noticed.
I installed NGK-Tr55 gapped at 0.60 and I used some antisize on the threads before installing. I also put in new MSD wires. Now the car runs fine and starts up with no porblems. But right around 1000 RPM is runs rough.
What could it be, what should I look for, ...?
Could it be that the gap is too much, cause my old ones were set at 0.58?
Could it be that I used too much antisize and that is messing something up?
Could it be the wires not connected properly?
Any help is appreciated! Thanks people!
