Hooker LT's and y-pipe are installed
 

I finished up the install today. I look like I crawled over a 100 feet of barbed wire, but still in one piece. <img border="0" alt="[Fluffy]" title="" src="graemlins/fluffy.gif" /> Hooking up the EGR and AIR was a pain. I spliced it all back together with heater hose though and it seems to be fine. I think I rechecked everything before I started it for the first time except the crucial main plug for the pass side coil pack! Doh
I started it with that unplugged, it threw an SES right away, I shut it off. I looked and reconnected it, dissconnected the battery, and restarted with no SES light. I'm going to drive it around to put some miles on it tomorrow, hopefully with no more problems.
First impression, it's LOUD <img border="0" alt="[devil]" title="" src="graemlins/gr_devil.gif" />
Really raspy since I have the cutout open too but I don't mind because it sounds mean <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />

Re: Hooker LT's and y-pipe are installed
 

</font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by FAST LS1:
<strong>I finished up the install today. I look like I crawled over a 100 feet of barbed wire, but still in one piece. </strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">hehe

Re: Hooker LT's and y-pipe are installed
 

I just finished today, I was taking my time. It was hot the last few days, didn't like working in direct sunlight. <img border="0" title="" alt="[Eek!]" src="gr_eek2.gif" /> Install was a cake walk for me, although some modification to my air tubes was needed (no EGR, blocked off). I love mine, as I am sure you do too. <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />

Re: Hooker LT's and y-pipe are installed
 

Put a bullet in the I pipe and that will take care of the rasp completly. At least it did for me. I like it loud, but hate the rasp at 2500 rpm's.

Re: Hooker LT's and y-pipe are installed
 

I installed my Hooker LTs and ORY on the 4th. <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" /> Seemed to me that it was much more difficult to get the stock manifolds out than it was to get the LTs in. <img border="0" title="" alt="[Eek!]" src="gr_eek2.gif" />

...the passenger-side header bolt closest the firewall was the---> <img border="0" alt="[devil]" title="" src="graemlins/gr_devil.gif" />

Brian

Re: Hooker LT's and y-pipe are installed
 

I`m glad to hear the install wasn`t that bad. I`m buying a set from someone on this site. Hooker Y-pipe is next on the list then they getting coated! Can`t wait! <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />