Motor mount installation Tried the search, but it seems to be down for the moment. Is there a write-up anywhere on the installation of a driver's side motor mount? I want to swap my stocker out for a poly mount, and I didn't see anything on Install University. My car's got 65k on it, and the engine seems to be getting a bit more movement that I want to try and diminish. |
Heres one https://ls1tech.com/forums/generation-iii-external-engine/492703-best-poly-motor-mount-write-up-ever-written.html but if your just doiing the driver side you just have to remove the alternater its not to hard. Just watch the wire on top of the alternater dont rip it like i did |
just wondering here. read motor mount replace forum. by lifting motor w/ jack under oil pan is it going to crush seal? fuerzaws6 :drive: |
Originally Posted by cowboysfan just wondering here. read motor mount replace forum. by lifting motor w/ jack under oil pan is it going to crush seal? fuerzaws6 :drive: |
Originally Posted by Element Tried the search, but it seems to be down for the moment. Is there a write-up anywhere on the installation of a driver's side motor mount? I want to swap my stocker out for a poly mount, and I didn't see anything on Install University. My car's got 65k on it, and the engine seems to be getting a bit more movement that I want to try and diminish. |
be sure to place a block of wood on the jack under the pan to distribute the weight along the edges of the pan...not the center ;) |
Originally Posted by brad8266 Nope. mount is going on when I get back from Middle East. fuerzaws6 :drive: |
All times are GMT -5. The time now is 08:08 AM. |
© 2024 MH Sub I, LLC dba Internet Brands