Camaro's w/ Hooker Catbacks..........
Thread Starter
TECH Regular
Joined: Dec 2005
Posts: 439
Likes: 26
From: IA
Camaro's w/ Hooker Catbacks.......... Could you post pics or your cars with the catback. I'm trying to decide between the Magnaflow or the Hooker catback systems. So far, I like the looks of the magnaflow and the sound of the hooker. So ya, not sure which way I'm gonna go. Thanks.
Cant go wrong with either. Ive had both on several of my fbodies and they are both great systems for the money. Both have great mellow tones around town and scream when let wide open. Both have minimal rasp too, which is hard to achieve with a y-pipe/catback setup. Go to LS1sounds.com. My buddy built that website and they have some good pics of exhaust systems/tips on both camaros and birds, as well as many different sound clips. Good luck buddy
magnaflow and hooker are 2 very good flowing catbacks. i like the hooker because to me it seems like it has a deeper rumble compared to magnaflow and has better looking tips.
i went with magnaflow because of its stainless steel and it has a nice crisp sound.
i went with magnaflow because of its stainless steel and it has a nice crisp sound.
Keep in mind Hooker is a very quiet exhaust. I have a big cam running through the Hooker and at idle its very quiet...now for the dual cutouts.. lol.
Ive heard Magnaflow with LT's and i freaking love it.
Ive heard Magnaflow with LT's and i freaking love it.
my hooker w/ LTs is obnoxious 
i love it! ive gotten nothing but compliments, sounds very evil above 3k rpm, but as stated above i have something loose inside my exhaust that rattles, ive checked every damn bolt and still nothing 
i love it! ive gotten nothing but compliments, sounds very evil above 3k rpm, but as stated above i have something loose inside my exhaust that rattles, ive checked every damn bolt and still nothing 
TECH Senior Member
iTrader: (42)
Joined: Dec 2004
Posts: 5,063
Likes: 0
From: Tomball/Nacogdoches TX
I love my hooker catback. If you're worried about it being too quiet, throw a cut-out on there to have the best of both worlds. Here's a video of mine opening/closing cut-out:
http://ledvault.armorysound.com/Brian/idle.mpg
http://ledvault.armorysound.com/Brian/idle.mpg
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
im kinda wondering about this as well... i USED to run a 3" TSP catted y pipe to a hooker cat back when i was bolt on, cam only and what not.. im now running TSP true duals but i need to swap out due to my th400...
Im going to run an ORY, ill probably run a cut out in the I pipe just for ***** n giggles.. but will the hooker be good up to 700 rwhp? ill probably put down close to 600 with juice.. (for now)
Im going to run an ORY, ill probably run a cut out in the I pipe just for ***** n giggles.. but will the hooker be good up to 700 rwhp? ill probably put down close to 600 with juice.. (for now)
im kinda wondering about this as well... i USED to run a 3" TSP catted y pipe to a hooker cat back when i was bolt on, cam only and what not.. im now running TSP true duals but i need to swap out due to my th400...
Im going to run an ORY, ill probably run a cut out in the I pipe just for ***** n giggles.. but will the hooker be good up to 700 rwhp? ill probably put down close to 600 with juice.. (for now)
Im going to run an ORY, ill probably run a cut out in the I pipe just for ***** n giggles.. but will the hooker be good up to 700 rwhp? ill probably put down close to 600 with juice.. (for now)
yeah i have true duals right now, but seriously there are ZIPPO exhaust shops out here that ill leave my car with.. theres little to none performance car shops out here, especially LSX shops. the easiest route i can go is a ORY + cut out, and cat back
I thought it was something loose in the rear hatch or antenna..nothing. It does it with the hatch open.
All bolts are tight, nothing is loose and hitting anything, exhaust has good clearance with everything.
Rattle is a phantom noise, just shows up after ive been revving or driving fast and highway speeds..sounds like a pencil being pushed between two metal parts..
god wish i had a camera so i could record the sound and post it.
Its driving me nuts as well, i might get a new muffler. But i dont understand, if something is loose in the muffler, wouldnt it rattle constantly?
I noticed going with a rubber tranny mount, made it alot worse.
seriously i have no idea why this happened. i mean is it too much to ask for to have a custom exhaust with rubber tranny mount that does not destroy my floorboard or y pipe?
lol that is not fair..prothane tranny mount driving me nuts now..its not bad at times, other times i want to bodily harm to myself.
it is worst when standing still actually, i can cope with it while driving, but **** gets old quick.
what is really awesome is that i have to wait another week until the shop can take a look at it, and they'll probably ghetto rig my **** with a bump stop
i dont understand how a switch from prothane to rubber tranny mount can **** everything up with a custom exhaust and prothane motor mounts sorry for the rant and
it is worst when standing still actually, i can cope with it while driving, but **** gets old quick.
what is really awesome is that i have to wait another week until the shop can take a look at it, and they'll probably ghetto rig my **** with a bump stop
i dont understand how a switch from prothane to rubber tranny mount can **** everything up with a custom exhaust and prothane motor mounts
sorry for the rant and 
my Hooker cat back seems to rattle at the hanger in the rear passenger side.
it's like the I pipe is a little long. Going to try to bend the hanger a little when I get time.
If that doesn't work I'll have to trim I pipe a little.
Love the sound tho.
Brad
it's like the I pipe is a little long. Going to try to bend the hanger a little when I get time.
If that doesn't work I'll have to trim I pipe a little.
Love the sound tho.
Brad