vibe problem
11-06-2008, 10:46 AM
#1
On The Tree
Thread Starter
Join Date: Mar 2006
Location: oakland,CA
Posts: 137
Likes: 0
Received 0 Likes
on
0 Posts
vibe problem ok so i posted this once before and tried all the suggestions that were given. no luck. so here it is again. at about 3000 to 3500 rpm the car/ motor vibrates. i changed the drive shaft, tranny, tranny mount, oil and u- joints. the propblem seems to be from the motor not the drivetrain. only thing left that i can do myself that i could think of was the motor mount but they don't look bad. any help would br great. i need to fix it so i can sell it.
Last edited by 98charlize; 11-06-2008 at 05:27 PM.
11-07-2008, 09:31 AM
#3
TECH Apprentice
iTrader: (8)
Join Date: Jun 2008
Location: somerset WI
Posts: 355
Likes: 0
Received 0 Likes
on
0 Posts
jack the car up and unbolt the TQ converter and slide it back then start the car and run it then you know if it is from the tq converter back or the motor/flexplate. if you have a auto.
manual push the clutch in and give it gas ant if it vib then it is the clutch/flywheel or the motor
manual push the clutch in and give it gas ant if it vib then it is the clutch/flywheel or the motor